Principle:
The marking-needle is controlled by the computer, move on traces as pre-edited characters and graphs, to strike materials at a high frequency under the application of compressed air, finally to form the needed characters and graphs on work-piece.
Main Features:
User can print on flat and circumference, engrave on cylinder pipe fitting such as flange, steel tube after installed circumferential fixture.
User can engrave on plate conveniently after installed the plate fixture, and print on the spare parts of machinery after removed.
Software with strong editing function support Windows operating system, easy to use, capable to mark Chinese and English characters, Arabic numbers and graphs, automatic marking serial numbers, international standard VIN codes and scales.
Applications:
Automobile, motorcycle, electric motor car, power equipment, automatic instrumentation, engine, diesel engine, mechanical, machine tools, hardware products, steel, all kinds metal pipe fitting, oil and boiler pipe fittings, gear, pump body, valve, fasteners, aviation, railway, parts of ship, various hard plastic products, etc.
Main tech-specification(Non-standard products can be customized):
Marking Range: Plane: 120mm× 80mm;
Circumference: φ 5mm~260mm
Marking Speed: ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth: 0.1~1mm adjustable
Repeat Precision: ± 0.01mm
Pneumatic pressure: 0.2~0.6Mpa
Weight: 63kg
Power consumption: 100W(not including air compressor and computer)
Size: 500mm× 330mm× 730mm
Hardness of work-piece: HRC60
Voltage: 220V± 10% 50Hz.
Marking Range Plane: 120mm× 80mm; Circumference: φ 5mm~260mm
Marking Speed ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth 0.1~1mm adjustable Repeat Precision ± 0.01mm
Pneumatic pressure 0.2~0.6Mpa Weight 63kg
Power consumption 100W(not including air compressor and computer) Size 500mm × 330mm× 730mm
Hardness of work-piece HR C ≤ 60 Voltage 220V± 10% 50Hz
The marking-needle is controlled by the computer, move on traces as pre-edited characters and graphs, to strike materials at a high frequency under the application of compressed air, finally to form the needed characters and graphs on work-piece.
Main Features:
User can print on flat and circumference, engrave on cylinder pipe fitting such as flange, steel tube after installed circumferential fixture.
User can engrave on plate conveniently after installed the plate fixture, and print on the spare parts of machinery after removed.
Software with strong editing function support Windows operating system, easy to use, capable to mark Chinese and English characters, Arabic numbers and graphs, automatic marking serial numbers, international standard VIN codes and scales.
Applications:
Automobile, motorcycle, electric motor car, power equipment, automatic instrumentation, engine, diesel engine, mechanical, machine tools, hardware products, steel, all kinds metal pipe fitting, oil and boiler pipe fittings, gear, pump body, valve, fasteners, aviation, railway, parts of ship, various hard plastic products, etc.
Main tech-specification(Non-standard products can be customized):
Marking Range: Plane: 120mm× 80mm;
Circumference: φ 5mm~260mm
Marking Speed: ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth: 0.1~1mm adjustable
Repeat Precision: ± 0.01mm
Pneumatic pressure: 0.2~0.6Mpa
Weight: 63kg
Power consumption: 100W(not including air compressor and computer)
Size: 500mm× 330mm× 730mm
Hardness of work-piece: HRC60
Voltage: 220V± 10% 50Hz.
Marking Range Plane: 120mm× 80mm; Circumference: φ 5mm~260mm
Marking Speed ≤ 50mm/s(3 or 4 characters, adjustable)
Marking Depth 0.1~1mm adjustable Repeat Precision ± 0.01mm
Pneumatic pressure 0.2~0.6Mpa Weight 63kg
Power consumption 100W(not including air compressor and computer) Size 500mm × 330mm× 730mm
Hardness of work-piece HR C ≤ 60 Voltage 220V± 10% 50Hz