Product Introduction
The fiberglass geogrid complex geocloth is the non-infiltrationthe materials base of fiberglass geogrid and geocloth. To prevent road surface crack caused by foundation crack reflection. The chemistry stability is good, the hot-stability is good, anti-weary dehiscence, anti-low temperature shrinkage crack, postponement reduction reflection crack.
The fiberglass geogrid complex geocloth is the non-infiltrationthe materials base of fiberglass geogrid and geocloth. To prevent road surface crack caused by foundation crack reflection. The chemistry stability is good, the hot-stability is good, anti-weary dehiscence, anti-low temperature shrinkage crack, postponement reduction reflection crack.
Product Features
1. Breadth 1.0m-6.5m, the weight is 200-1500mg/m.
2. Tensile, slitting-resistant, bursting, and other indicators of high physical and mechanical properties.
3. The compound earthwork membrane uses geocloth as the basic; therefore it has geocloth to isolate, draining water, reinforcement, protection, but also has the anti-seepage function.
4. Because it selects the high polymer material, and the technique of production increased the antioxidant, therefore may use in the non-conventional temperature environment.
Product Function
It can widely apply in the water conservation, the municipal administration, the building, the transportation, the subway, the tunnel, the environmental protection and so on.
|
Tensile
Strength (KN) |
Warp
|
≥30
|
≥50
|
≥60
|
≥80
|
≥100
|
≥120
|
≥150
|
≥200
|
|
Weft
|
≥30
|
≥50
|
≥60
|
≥80
|
≥100
|
≥120
|
≥150
|
≥120
|
|
|
Elogation
|
Fiberglass
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
﹤4 %
|
|
Polyester
|
﹤13%
|
﹤13%
|
﹤13%
|
﹤13%
|
﹤13%
|
﹤13%
|
﹤13%
|
﹤13%
|
|
|
Mesh size(mm)
|
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
12.7×12.7
25.4×25.4 42×42 50×50 |
|
|
Elastic Modulus
(Fiberglass) |
76
|
76
|
76
|
76
|
76
|
76
|
76
|
76
|
|
|
Width(m)
|
1～6
|
1～6
|
1～6
|
1～6
|
1～6
|
1～6
|
1～6
|
1～6
|
|
|
Length(m)
|
50～300
|
50～300
|
50～300
|
50～300
|
50～300
|
50～300
|
50～300
|
50～300
|
|
|
Temperature
Resistant (℃) |
Fiberglass
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
|
Polyester
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
-100～280
|
|
|
Resin
Content (%) |
Fiberglass
|
18～20
|
18～20
|
18～20
|
18～20
|
18～20
|
18～20
|
18～20
|
18～20
|
|
polyester
|
≤30%
|
≤30%
|
≤30%
|
≤30%
|
≤30%
|
≤30%
|
≤30%
|
≤30%
|
|
|
Glue Type
|
Fiberglass
|
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
Bitumen
PVC SBR soakage |
|
Polyester
|
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
PVC
SBR soakage |
|