WS-AL2460 WELLSEE Intelligent street lamp controller CE RoHS
|
Brand
|
WELLSEE
|
Dimension
|
210*125*50mm
|
|
Name
|
Solar charge controller
|
Weight
|
1100g
|
|
Model
|
WS-AL2460
|
Package
|
18pcs/carton
|
WS-AL2460 12/24V, 40A/ 50A/60A Intelligent street lamp controller applies in solar photovoltaic lighing system below 1440W, which coordinates the working of solar panels, batteries and lamps, and is an important module to the whole system. With its virtues of one-tough process, convenient operation, excellent capability and reliable quality, it is a multifunctional and all-purpose solar cotnroller special for various solar street lamps.
WS-AL2460 12/24V, 40A/ 50A/60A Intelligent street lamp controller is controlled by micro-CPU and intelligently senses outside light. It will automatically turn on lights at dark. This controller also intelligently monitors battery charging and discharging. It will protect batteries by turning off lights automatically when the battery boltage is low. The controllers will floatcharge the batteries by pulse-width-modulation (PWM) automatically as the batteries approach full charge. It will cut off charging current to protest batteries from discharging through the solar panel at dark. The controller also has a protection circuit to prevent accidental damage.
Functions:
1. It can prevent the battery from over-charging and over-discharging.
2. It can prevent reverse charging (the battery charges the solar panel).
3. It can prevent reverse connection of the battery and solar panel.
4. It will start up the lighting system in the evening automatically according to the intensity of the light.
5. It will shut down the lighting system according to the time setting or shut down the lighting system automatically when it is dawn.
Indicator Light:
The controller has a three color battery power indicator LED light, and a green load indicator light. They indicator of the working condition of charging and discharging:
1. The red indicator LED light (CHARGE) will light when the batteries are being charged through the solar panel.
2. The green LOAD LED will light when the load is turned on.
3. The LOAD indicator also helps with testing and setup.
4. The three color battery power indicator light will be red if the battery voltage is low, orange during normal working range and green for a fully charged battery.
The Parameter Sheet:
|
Model
|
WS-L2460 40A
|
WS-L2460 50A
|
WS-L2460 60A
|
|
System voltage
|
12V/24V Automatic distinguish voltage
|
||
|
Max charge current
|
40A
|
50A
|
60A
|
|
Max discharge current
|
40A
|
50A
|
60A
|
|
Charge off voltage(HVD)
|
14.4V/28.8V
|
||
|
Low Voltage Directive(LVD)
|
10.8/21.6V
|
||
|
Low Voltage Restore(LVR)
|
11.8V/23.6V
|
||
|
Light operate
|
light control turn on + light control turn off
|
||
|
Light time control
|
Light control turn on/off + time control turn on/off
|
||
|
Time control classification
|
0.5 hours started,half an hour of one grade ,up to 10 hours
|
||
|
Out put route
|
single bulb
|
||
|
Ambient temperature
|
-25°C-+55°C
|
||
|
Safe degree
|
IP22
|
||
|
Quiescent dissipation
|
24mA
|
||
|
Max loop voltage drop
|
350 mV
|
||
|
Control method
|
Pulse Wide Frequency Modulation (PWM)
|
||
Any change should refer to the specification of products!