HECY2513-500 Wide Breadth YAG Sheet Metal Laser Cutting Machine
Product Introduction
HECY2513-500 wide breadth metal laser cutting machine integrates optical , mechanical, and electricity in one, which adopts laser, computer control technology and high-performance CNC laser power system. It is applied to cut stainless steel, carbon steel, alloy steel, spring steel, aluminum, silver, copper, titanium and some metal plate and pipe. Widely used in sheet-metal structure, high-low-voltage electrical cabinet production, hardware, knife-volume, production of advertising signs, metal crafts, decoration aviation, mechanical parts, electrical meter, saw blades, spring-chip and other industries.
Product Performances
1. Good beam quality, high efficiency of electricity-optical conversion, good reliability, and long-term stability quick processing speed, high efficiency, good economic returns, small slot, smooth cutting surface.
2. Good software compatibility, which can edit a variety of texts and images etc.
3. Auto focus when cutting beautiful and tidy kerf, no need processing after cutting,even if the surface is not plain, it ensure the quality of cutting.
4. Small heat-affected zone, not easy to be deformation. Better than other heat treatment.
Advanced Mechanical Design
1. Convenient pneumatic folder device.
2. Floating loader and unloader facilitates the loading and unloading, which could aviod surface scratches.
3. Gantry type mechanical structure, compact, covering small area.
4. Adopts Panasonic servo drive and precision ball screw for movementsto optimize the dynamiz performance of machine.
5. Roller type tray trailer with compact design make it's easy to connect material
6. Large format cutting, cutting area can reach 1250x2500mm. Other format can be customized.
7. See coaxiaI red as insturction source to adjust Iaser and make positioning instructions.
Advantages
1. Be widely used in cutting stainless steel, carbon steel, alloy steel, spring steel, aluminum, copper, silver, titanium and other metal materials below 6 mm.
2. High cutting precision:suitabIe for cutting aII kinds of sheet metals and machine paneIs, as weII as varlous metaI characters, decorative pattern, precise fittings,etc.
3. Max cutting speed can reach 10m/min.
4. Low consumption cost: only compressed air blowing needed in the cutting process.
5. Fast investment recovery:90% gross margin, according to processing income of 4, 000 yuan daily, it takes 5-6 months to return on investment.
Powerful control system
1. Using efficient CNC control software, which contain the following advantages:powerful, Strong compatibility.Compatible with NC documents, DXF, PLT, AI mapping software.
2. Convenient operation and maintenance. Without the mold, you can draw any graphic you need and the product can come out immediately. Save time and money.
3. Nesting editing software as the optional can fully improve the efficiency of material's utilization and cutting.
4. Powerful graphics display, Directly effect the performance of cutting, On-line monitoring of cutting path.
5. All the operational information are displayed on the LCD screen and friendly man-machine conversation interface bring easy operaticn and maintenance for customers.
6. AutomaticaIly record position, Back to the breakpoint cutting, Regression function.
Technical Parameter
Type
|
HECY2513-500
|
Medium of Laser
|
Nd: YAG500
|
Cutting Area(mm)(length×width)
|
2500mm×1250mm
|
Max Cutting Speed(m/min)
|
10m/min
|
Cooling Way
|
water cooling
|
Pulse repeted Frequence
|
0-500Hz
|
Min line Width
|
0.12mm
|
Cutting Depth
|
0.2-6mm (up to the material)
|
Laser Wavelength
|
1064nm
|
Working Power
|
380V/50Hz/50A
|
Continuous Working Time
|
24 hours
|
Weight
|
About 1080kg
|
Outline Size(mm) (Length×Width×Height)
|
3250mm×1950mm×1400mm
|
HE Laser HECY2513-500 Cutting Parameters
Metal Material
|
The Cutting Depth(mm)
|
Max Cutting Spee(mm/min)
|
Punch Diameter
|
Min line Width
(mm)
|
Cutting Condition
|
Note
|
Stainless Steel
|
0.5
|
4000
|
0.15
|
0.12
|
compressed
air blowing
|
1.The cutting speed could be increased by 50% -100%
with oxygen blowing
2.Nitrogen blowing make
a smooth cut without nonoxidation. But the cutting speed could be reduced by 20%
|
1
|
2000
|
0.2
|
0.15
|
|||
2
|
1000
|
0.25
|
0.2
|
|||
3
|
500
|
0.3
|
0.25
|
|||
4
|
300
|
0.4
|
0.3
|
|||
5
|
200
|
0.6
|
0.4
|
|||
6
|
150
|
0.7
|
0.45
|
|||
Carbon Steel
|
0.5
|
4000
|
0.12
|
0.12
|
compressed
air blowing
|
The cutting
speed could
be increased
by 50% -100%
with oxygen
blowing
|
1
|
2400
|
0.15
|
0.12
|
|||
2
|
1000
|
0.2
|
0.15
|
|||
3
|
500
|
0.3
|
0.2
|
|||
4
|
350
|
0.5
|
0.3
|
|||
5
|
240
|
0.6
|
0.35
|
|||
6
|
200
|
0.8
|
0.4
|
|||
Aluminum
|
0.5
|
3600
|
0.12
|
0.12
|
compressed
air blowing
|
|
1
|
2000
|
0.15
|
0.12
|
|||
2
|
1200
|
0.2
|
0.15
|
|||
3
|
500
|
0.25
|
0.2
|
|||
4
|
300
|
0.3
|
0.25
|
|||
5
|
200
|
0.4
|
0.3
|
|||
6
|
150
|
0.5
|
0.4
|
|||
Brass
|
0.5
|
2400
|
0.15
|
0.12
|
compressed
air blowing
|
|
1
|
1500
|
0.2
|
0.15
|
|||
2
|
900
|
0.25
|
0.2
|
|||
3
|
400
|
0.3
|
0.25
|
|||
4
|
300
|
0.4
|
0.3
|
|||
5
|
200
|
0.5
|
0.4
|
|||
Red Copper
|
0.5
|
1000
|
0.12
|
0.12
|
compressed
air blowing
|
|
1
|
700
|
0.15
|
0.12
|
|||
2
|
300
|
0.2
|
0.15
|
|||
There is no slope when cutting thickness is less than 1mm, the slope is less than 1.5 degrees when cutting thickness is more than 1mm .
|