wood mouldings,mouldings, decoration mouldings,S4S, ceiling, chair rails,timber,paulownia decoration
-Base Moldings: Base molding installed along the bottom edge, where the base meets the floor. And, or, a cap (base cap) may be added to the top of the base, which used to cover up the gap that occurs between the wall bottoms and flooring. The baseboard and base trim give the room an impression of solidity, while protecting the walls from scrapes and bumps, and good appearance looking.
-Dimension: 5/8 x 3, 5/8 x 3-1/2, 5/8 x 4, 5/8 x 4-1/2, 5/8 x 5, 5/8 x 5-1/2, random length.
-Crown Moldings: Crown molding attached to both wall and the ceiling. The molding itself is attached at a 45 degree angle to both of these surfaces. It softens the 90 degrees angle where the ceiling and wall meet. Crown molding provides not only decoration, but also creates a gentle transition between the walls and ceiling. The ninety degree angle is softened by the crown molding, which attaches at forty five degree angles to both, the ceiling and wall surface.
-Dimension: 3/8,5/8 x 1-3/4, 2-1/4, 2-3/8, 2-5/8, 3-1/4, 3-5/8, 5-3/8.
-Casing Molding: Casing molding surrounds a door, or window opening, on the flat inside walls of a home. It covers both the edge of the drywall or plaster, and the edge of the jamb, giving the finished look to your opening.
Dimension: 3/4 x 2-1/4, 3/4 x 2-1/2, 3/4 x 3-1/4, 3/4 x 3-1/2, 3/4 x 4, 1 x 2-1/2, 1 x 3-1/2, 1 x 4
-Door Jamb Molding: The frame around the door. Two vertical pieces held together by a head jamb forming the inside lining of a door opening. What the door is hinged to. The jamb size needed relates directly to the thickness of the wall. The jamb is usually finger jointed and laminated, and then goes thru molder to be a needed design.
-Door Stop Molding: A door stop is the small piece of wood, which is attached to the door jambs on both sides and on top of the door. This strip of wood is where the door comes to rest when it is closed. It stops the door from moving any further, and also covers the gap that would otherwise appear between the door and the jambs.
-Door stile & Rail Molding: A series of stiles and rails assembled to be a basic structure of a door, which holds the door panels or glasses in. It is custom sizes and designs.
-Others: Corn Cribbing, Grooved Roofing(S4S&G1S), Pulley Stile, Sill, Casket Stock(S3S T1E, S3S G1E), Beaded Shelving(S3S B1E)
Dimension: Thickness: 23/32, 3/4, 1-1/2
Width: 3-7/16, 4-1/2, 4-23/32, 5-7/16
Specifications
paulownia wooden mouldings
edge glued and laminated allowed
prime finished(PU prime and water painting)
edge glued and laminated allowed
prime finished(PU prime and water painting)
paulownia wooden mouldings
edge glued and laminated allowed(E1/Type1 white glue), surfaced the effective face, stained(PU & UV) or prime finished(NC prime) or syaerlack PU finish or clear without painting, random length.
-Base Moldings: Base molding installed along the bottom edge, where the base meets the floor. And, or, a cap (base cap) may be added to the top of the base, which used to cover up the gap that occurs between the wall bottoms and flooring. The baseboard and base trim give the room an impression of solidity, while protecting the walls from scrapes and bumps, and good appearance looking.
-Dimension: 5/8 x 3, 5/8 x 3-1/2, 5/8 x 4, 5/8 x 4-1/2, 5/8 x 5, 5/8 x 5-1/2, random length.
-Crown Moldings: Crown molding attached to both wall and the ceiling. The molding itself is attached at a 45 degree angle to both of these surfaces. It softens the 90 degrees angle where the ceiling and wall meet. Crown molding provides not only decoration, but also creates a gentle transition between the walls and ceiling. The ninety degree angle is softened by the crown molding, which attaches at forty five degree angles to both, the ceiling and wall surface.
-Dimension: 3/8,5/8 x 1-3/4, 2-1/4, 2-3/8, 2-5/8, 3-1/4, 3-5/8, 5-3/8.
-Casing Molding: Casing molding surrounds a door, or window opening, on the flat inside walls of a home. It covers both the edge of the drywall or plaster, and the edge of the jamb, giving the finished look to your opening.
Dimension: 3/4 x 2-1/4, 3/4 x 2-1/2, 3/4 x 3-1/4, 3/4 x 3-1/2, 3/4 x 4, 1 x 2-1/2, 1 x 3-1/2, 1 x 4
-Door Jamb Molding: The frame around the door. Two vertical pieces held together by a head jamb forming the inside lining of a door opening. What the door is hinged to. The jamb size needed relates directly to the thickness of the wall. The jamb is usually finger jointed and laminated, and then goes thru molder to be a needed design.
-Door Stop Molding: A door stop is the small piece of wood, which is attached to the door jambs on both sides and on top of the door. This strip of wood is where the door comes to rest when it is closed. It stops the door from moving any further, and also covers the gap that would otherwise appear between the door and the jambs.
-Door stile & Rail Molding: A series of stiles and rails assembled to be a basic structure of a door, which holds the door panels or glasses in. It is custom sizes and designs.
-Others: Corn Cribbing, Grooved Roofing(S4S&G1S), Pulley Stile, Sill, Casket Stock(S3S T1E, S3S G1E), Beaded Shelving(S3S B1E)
Dimension: Thickness: 23/32, 3/4, 1-1/2
Width: 3-7/16, 4-1/2, 4-23/32, 5-7/16