Technical specifications:
R2O Content: <0.8%
Filament diameter:11μm-13μm
Moisture:≤0.2%
Loss on Ignition:2%-9%
Binder Type Powder or Emulsion
Compatible Resin: Polyester
Styrene Solubility <50seconds
Product Characteristics:
1.Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.
2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.
3.High mechanical strength and high wet strength retention.
| Product code | Width(mm) | Compatible resin | Breaking Strength(N/150mm) |
|
EMC80
EMC100
EMC120
EMC150
|
≤3200
≤3200
≤3200
≤3200
|
EP/UP
EP/UP
EP/UP
EP/UP
|
30
30
30
35
|
*Special:products are according to customer's requirements.
Individual and bulk packaging:
Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.
Each standard pallet with the size of 1020mm×1280mm×120mm contains 20 of rolls with the packaging type of 4x5.
Static stacking of the pallets is possible up to one high.
Storage:
The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10°C to 35°C and at a relative humidity between 35% to 55%.