Product Main

Specifications

Model:
ST-9182B
Name:
Tri-Band mobile signal booster/repeater
Specifications:
900mhz/1800mhz/2100mhz signal booster/repeater
Category:
Tri-Band signal booster/repeater
Product Notes:
Product Feature:
*  Provide quick coverage solution for small signal weak &   block zones.reduce drop/off calls.
*  Compact size, low consuption, easy installation, great cover.
*  Cover about 200~3000 m² without block or obstruct.
*  Reduce cellphone transimt power and radiation, extend cellphone battery life.
*  High linear design, low interference to BTS.
*  Manual Gain Control function.
*  Triband in one repeater, effectively reduce the project cost.
   Description
Items Uplink Downlink
Frequency Range GSM900+DCS+WCDMA 890 ~ 915 MHz 935 ~ 960 MHz
1710 ~ 1785 MHz 1805 ~ 1880 MHz
1920 ~ 1980 MHz 2110 ~ 2170 MHz
Max.Gain 65 ~ 70 dB 65 ~ 75dB
Manual Gain Control 31dB in step of 1dB
Automatic Gain Control >20dB 
Bandwidth Wide Band
Ripple in Band CDMA, GSM≦8dB ; DCS≦10dB; WCDMA≦6dB
Max. Input Power Without Damage 0 dBm
Output Power   10 ~ 20 dBm 10 ~ 24 dBm
Intermodulation Products 9KHz~1GHz ≦ -36 dBm  ≦ -36 dBm@Po≦20dBm
1GHz~12.75GHz ≦ -30 dBm  ≦ -30 dBm@Po≦20dBm
Spurious Emission 9KHz~1GHz ≦ -36 dBm  ≦ -36 dBm 
1GHz~12.75GHz ≦ -30 dBm  ≦ -30 dBm 
Spurious Emission Mask( WCDMA ) Complies with 3GPP TS 25.106
Modulation Accuracy( WCDMA ) Complies with 3GPP TS 25.106
Peak Code Domain Error( WCDMA ) Complies with 3GPP TS 25.106
ACRR( WCDMA ) ≥ 30dB @±5MHz&±10MHz
Noise Figure @ max. gain ≦ 8 dB(Typical)
Return loss ≦ - 8 dB
Time Delay ≦0.5 μs
MTBF >50000 hours
Power Supply AC: 90~265V, 50/ 60Hz; DC: 12V 10A
Power Consumption < 55W
Impedance 50 ohm
Input Signal Level Normal  At the edge of green and orange( -50dBm or more)
Low Green
High 1-5dB range: Orange;  >20dB: Red
Mechanical Specification             
 RF Connector N-Female
Switch Power Switch, Manual Gain Control Switch
 Cooling  Heatsink Convection cooling 
Dimensions (D x W xH ) 330*268*58(mm)
Weight < 5 Kg
Installation Type Wall Installation 
Environment Conditions  IP40
Humidity < 90%
Operating Temperature  -10℃~55℃