VAG Commander 5.1
Features:
USB VAG Commander 5.1 OBDII Diagnostic Cable for VW, Audi, Seat, and Skoda lets you perform diagnostic work on your car without paying a mechanic.
This Commander 5.1 diagnostic cable allows you to connect your car directly to your laptop computer. The software interface lets you access data from your car right on your computer screen. You can view live data straight from your vehicle's engine. You will have full access to your car's diagnostic trouble codes (DTCs) and see their full definitions as well as the location and type of problem, so you won't have to spend time looking up the code's meaning. You can also clear all generic and some manufacturer specific DTCs. You will also have access to your vehicle's OBDII Freeze Frame data (which is captured when the vehicle's on board computer detects problems). Your local mechanic charges you a lot for each of those tests, so get this cable and start saving today.
Getting started with this diagnostic cable is easy. All you need is this VAG cable, a computer, and a vehicle. No extra converters, connectors, or tools are required. Plug one end of the cable into your vehicle's Diagnostic Link Connector (DLC), which is usually located within easy reach of the driver. Plug the other end into your computer's USB port, and install the included software. You're now ready to access and interact with your car's on-board computer. Do-it- yourself has never been so simple!
Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters
Compatible Vehicles:
- VW: Caddy, Crossgolf, EOS, Golf5, Individual, Jetta (MY2006), Passat platform B6 (MY2006), Phaeton, Touaran, Touareg
- Audi: A3, A8, A6, Q7
- Seat: Altea, Altea XL, Leon (2005+), Toledo (2005+)
- Skoda: Octavia II, Roomster, Scout
- Porsche: Cayenne (2005+)
- Operating Software Compatibility: Windows 98SE, ME, 2000, XP
- OBDII Plug: 16-pin (Male)
- USB: 2.0 and backward compatible
- Dimensions: L:186cm
Product Notes:
- Manual definition of running diagnostic session
Special functions about instrument clusters from VDO
- Retrieve Vehicle Identification Number (VIN)
Read Freeze Frames
- Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80)
- Supports popular diagnostic functions such as identifications, coding, and adaptations
- Broadcast diagnostic request, e.g., disable normal communication, logistic (transport) mode, etc.
- Manage brand new immobilizer units where programming of PIN, SKC, BGW, MAC is allowed
- Supports many additional functions. Visit popular DIY car maintenance forums to get an idea about all the great things you can do with a VAG Commander 5.1 cable!
USB VAG Commander 5.1 OBDII Diagnostic Cable for VW, Audi, Seat, and Skoda lets you perform diagnostic work on your car without paying a mechanic.
This Commander 5.1 diagnostic cable allows you to connect your car directly to your laptop computer. The software interface lets you access data from your car right on your computer screen. You can view live data straight from your vehicle's engine. You will have full access to your car's diagnostic trouble codes (DTCs) and see their full definitions as well as the location and type of problem, so you won't have to spend time looking up the code's meaning. You can also clear all generic and some manufacturer specific DTCs. You will also have access to your vehicle's OBDII Freeze Frame data (which is captured when the vehicle's on board computer detects problems). Your local mechanic charges you a lot for each of those tests, so get this cable and start saving today.
Getting started with this diagnostic cable is easy. All you need is this VAG cable, a computer, and a vehicle. No extra converters, connectors, or tools are required. Plug one end of the cable into your vehicle's Diagnostic Link Connector (DLC), which is usually located within easy reach of the driver. Plug the other end into your computer's USB port, and install the included software. You're now ready to access and interact with your car's on-board computer. Do-it- yourself has never been so simple!
Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters
Compatible Vehicles:
- VW: Caddy, Crossgolf, EOS, Golf5, Individual, Jetta (MY2006), Passat platform B6 (MY2006), Phaeton, Touaran, Touareg
- Audi: A3, A8, A6, Q7
- Seat: Altea, Altea XL, Leon (2005+), Toledo (2005+)
- Skoda: Octavia II, Roomster, Scout
- Porsche: Cayenne (2005+)
- Operating Software Compatibility: Windows 98SE, ME, 2000, XP
- OBDII Plug: 16-pin (Male)
- USB: 2.0 and backward compatible
- Dimensions: L:186cm
Product Notes:
- Manual definition of running diagnostic session
Special functions about instrument clusters from VDO
- Retrieve Vehicle Identification Number (VIN)
Read Freeze Frames
- Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80)
- Supports popular diagnostic functions such as identifications, coding, and adaptations
- Broadcast diagnostic request, e.g., disable normal communication, logistic (transport) mode, etc.
- Manage brand new immobilizer units where programming of PIN, SKC, BGW, MAC is allowed
- Supports many additional functions. Visit popular DIY car maintenance forums to get an idea about all the great things you can do with a VAG Commander 5.1 cable!