cnc lathe machine HL-55SN:
1. Max. swing overbed ø727 mm.
2. Max. turning diameter ø640mm.
3.Max. turning length ø2320mm.
4. FANUC α22i wide speed range motor with ZF gearbox.
5. Choice of 8,12 station turret.
6. 15"chuck.(up to 22" opt.)
7. Meehanite base, saddle and headstock casting.
8. Precision heavy duty box ways.
9. Overload protection on X, Z axis.
10. Automatic lubricating system.
11. Splashguard.
| Specification | ||
| Capacity | Max. swing over bed | Ø 727 / Ø 710 / Ø 710 mm |
| Max. turning diameter | Ø 640 mm | |
| Max. turning length | 1070 / 1820 / 2320mm | |
| Hole(Bar Capacity) | Ø 117 mm | |
| Travel | X-axis | 340 mm |
| Z-axis | 1250/2000/2500mm | |
| Spindle | Speed | 2500 rpm |
| Chuck size | 15" | |
| Spindle nose | A2-11 | |
| Hole through spindle diameter | Ø 132 mm | |
| Front Bearing ID./OD. | Ø 170 x Ø 230 mm | |
| Rear Bearing ID./OD. | Ø 160 x Ø 220 mm | |
| Spindle motor | α22 / 7000i | |
| Spindle motor direct drive(Rated continuously/30min) | 22/26 kw | |
| Spindle motor toeque | 1181 N-m | |
| Turret | Number of stations | 12 |
| Turning tool OD | Ø 25 mm | |
| Turning tool ID | Ø 50 mm | |
| Tailstock | Travel | 1094/1844/2344 mm |
| Quill diameter | Ø 120 mm | |
| Quill travel | 120 mm | |
| Quill taper | MT#5 | |
| Axial Thrust of Quill | 11544kgf | |
| Feedrate | X-axis rapid traverse | 16000/16000/12000 mm/min |
| Z-axis rapid traverse | 20000 mm/min | |
| Dimension | Width | 4355/5150/5605mm |
| Depth | 2000mm | |
| Height | 2130mm | |
| Weight | 9000/11000/13000kg | |
| Disclaimer | « Design and specifications are subject to change without prior notice » | |