IDG-100, IDG-200 & IDG-300 Can Internal Diameter Gauge
This unit serves for quickly checking the Internal Diameter of can. It is supply with a calibration piece.
IDG-100 is for small diameter cans, Cans dia. 52-100 mm (only measure one type can), If equipped with the data processor, it can be auto calculate to achieve the actual internal diameter of the 2-piece cans, and avoid the measurement deviation caused by the "ellipse effect".
This unit serves for quickly checking the Internal Diameter of can. It is supply with a calibration piece.
IDG-100 is for small diameter cans, Cans dia. 52-100 mm (only measure one type can), If equipped with the data processor, it can be auto calculate to achieve the actual internal diameter of the 2-piece cans, and avoid the measurement deviation caused by the "ellipse effect".
IDG-200 is for large diameter cans, Cans dia. :80-260 mm (only measure one type can)
IDG-300 is compatible for two (2) or three (3) sizes of cans.
One type cans must equip with one calibration pieces and one set of measure blocks (change parts).
If you must measure several type cans, you can order several pcs of IDG-100 or IDG-200.
Or you can order several psc of calibration pieces and several sets of measure blocks.
If you must measure several type cans, you can order several pcs of IDG-100 or IDG-200.
Or you can order several psc of calibration pieces and several sets of measure blocks.
Technical data:
Resolution : 0.01 mm
Resolution : 0.01 mm