CanNeed SCG-100 Seamer clearance Gauge, a quick and accurate way to set up seamers.To measure the roll height off the chuck and the lateral distance between the roll and chuck.
Old method
Today, most companies are still using the feeler gauges (see the below picture), to try and determine if there is enough distance between the roll and chuck. This is a very inaccurate procedure and cannot produce accurate results. Similarly inaccurate methods are used for adjusting the roll height.
For vertical (using a seamer roll height gauge) adjustment, most companies use a vertical "pin gauge height" to position the roll and chuck. However, each of these measurements affect one another because of the shapes of the roll and chuck profiles!
Old method
Today, most companies are still using the feeler gauges (see the below picture), to try and determine if there is enough distance between the roll and chuck. This is a very inaccurate procedure and cannot produce accurate results. Similarly inaccurate methods are used for adjusting the roll height.
For vertical (using a seamer roll height gauge) adjustment, most companies use a vertical "pin gauge height" to position the roll and chuck. However, each of these measurements affect one another because of the shapes of the roll and chuck profiles!
SCG-100 Seamer clearance Gauge
The Clearance Gauge takes a completely different approach to the problem. To measure the roll height off the chuck and the lateral distance between the roll and chuck.
The Clearance Gauge allows users to do predictive maintenance on their seamers before they go out of specifications. The clearance gauge is able to not only quickly and accurately set up the seamer, but makes sure that all the seamer heads are performing perfectly as near as possible to the nominal value.
Instead of focusing on checking seams after the double seam is already closed, the Clearance Gauge helps optimize the can seaming process by taking out variations between the different seamer heads and optimizing the seamer itself!
Today, covering most seamer models, these seamers show a clear and dramatic performance improvements by using this gauge.
Instead of focusing on checking seams after the double seam is already closed, the Clearance Gauge helps optimize the can seaming process by taking out variations between the different seamer heads and optimizing the seamer itself!
Today, covering most seamer models, these seamers show a clear and dramatic performance improvements by using this gauge.
Features:
*Adjust 1st and 2nd op seaming rolls quickly!
*Optimizes seamer performance!
*Reduce Seamer stop rates!
*Reduce Seamer stop duration!
*Seamer adjustments can be done quickly and easily.
*Locate faulty chuck and roll bearings and shanks!
*Easily see broken and eroded rolls and chucks!
*Return on investment for the clearance gauge is extremely quick.
*Adjust 1st and 2nd op seaming rolls quickly!
*Optimizes seamer performance!
*Reduce Seamer stop rates!
*Reduce Seamer stop duration!
*Seamer adjustments can be done quickly and easily.
*Locate faulty chuck and roll bearings and shanks!
*Easily see broken and eroded rolls and chucks!
*Return on investment for the clearance gauge is extremely quick.