Product Main

Specifications

Products Name:Voip Phone Adapter
Product Model: Linksys PAP2 NA
· 
 
 
 
Linksys Phone Adapter--PAP2 NA ver. two FXS SIP Gateway. 2 RJ11-FXS port, Single RJ45. Support 2 line User at same time.
        The Linksys PAP2 NA  is "UNLOCKED", and may be configured for use with most SIP based VoIP Services that allow BYOD (Bring Your Own Device). Inexpensive, easy to install and simple-to-use, the Linksys PAP2 connects a standard telephone or fax machine to IP-based data networks. IP telephony service providers and enterprise users can offer residential and business users traditional and enhanced communication services via the customer`s broadband connection to the Internet or Local Area Network (LAN).
Linksys PAP2  Features:  
The Linksys Phone Adapter enables highquality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and for Voice-over-IP 
Phone Adapter with 2 Ports use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers--like having two phone lines. With an appropriate Internet telephone service provider, you`ll get clear telephone reception and reliable fax connections, even while using the Internet at the same time fornormal data operations
Two voice ports (RJ-11) for analog phones or fax machines with two independent telephone numbers
One RJ-45 port for 10Base-T Ethernet connection
Supports Dynamic Host Configuration Protocol (DHCP)
Supports Session Initiation Protocol (SIP)
Supports multiple voice compression G.711, G.726, G.729, and G.723.1
Web-based configuration through a built-in web server
Telephone key pad configuration via voice prompts
Supports DTMF tone detection and generation
Supports FSK Caller ID, DTMF Caller ID and FSK VMWI Support echo cancellation and Voice Activity Detection (VAD)
Password protected access and configuration
Terminating Impedance Agnostic - 8 Settings
Call Waiting, Cancel Call Waiting
Caller ID with Name / Number
Caller ID Blocking
Call Waiting Caller ID with Name / Number
Call Forwarding: No Answer / Busy / All
Do Not Disturb
Call Transfer
Message Waiting Indication - Visual and Tone Based
Call Return
Call Back on Busy
Call Blocking with Toll Restriction
Delayed Disconnect
Distinctive Ringing
Off-Hook Warning Tone
Selective / Anonymous Call Rejection
Hot Line and Warm Line Calling
Speed Dialing of 8 Numbers / Addresses
 Interfaces
Ethernet Jack --- 1 X LAN
FXS port ---- 2 FXS Port for Tel/Fax
Power port --- 1 X 5V, 2A power
Operation temperature: 0 to 50° C (32° to 122° F)
Storage temperature: -30° to 65° C (-22° to 149° F)
Humidity: 10 to 90% no de
Payment
 
1 We accept payment by Alipay,Western union andT/T
2 Please complete the payment within 7 DAYS after purchasing the items
3  Please only purchase which you intend to pay,as a non payer will be reported to alibaba,and receive a unpaid item strike.
Guarantee
 1   Import duties, taxes and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility,Pls kindly contact us for changing lower the items value if you needed.
 2   2 Year Shelf Life.
 3  30 Day Money Back Guarantee.
 4   2 Year Manufacturer Warranty.
 
  Feedback
 
1  Please kindly leave us POSITIVE feedback if we DO do a good job 
2  Please DO NOT leave us negative or neutral feedback without contacting us
 
 

Table 3. Cisco SPA400 PSTN Gateway Documentation
Document
Description
End-user Documentation
SPA400 Quick Install Guide
Basic Installation and WebUI access
Reseller/VAR/SP Documentation
SPA9000 Installation and Configuration Guide - Configuration Wizard
Installation and Configuration Guide using the Cisco SPA9000 Configuration Wizard - includes SPA400 Configuration
SPA9000 Installation and Configuration Guide - WebUI
Installation and Configuration Guide using Web UI access (known as manual configuration) - includes SPA400 Configuration
SPA9000 Administration Guide
Advanced Configuration Guide for SPA9000 system - Includes SPA400 configuration
Table 4. Ordering information - Cisco SPA400 PSTN Gateway
Product Name
Specification
SPA400-AU/EU/NA
• PSTN FXO Gateway for SPA9000 - 4 FXO ports
• Voicemail Server for SPA9000 - 32 voicemail box
Note: EU version for SPA400 includes both EU and UK power clips
Note: The Product Part number is specified as the ProductName-XX. If the product has no suffix, the product is considered to be applicable WW unless otherwise specified. The SKU suffix correspond to the following countries/regions Power Adapters or Wireless Specifications: AU-Australia/New Zealand, AS-APAC and AU, KR-Korea, EU-Europe, NA-North America, UK-United Kingdom, SG-Singapore.
Table 5. Product Specification
Hardware Configuration
Specification
Packaging Type
Desktop
Product Architecture
Onboard Ethernet Ports
One 10/100 Mbps WAN uplink (for switch connectivity)
PSTN FXO ports
4 Built-in FXO ports
Note: In case of requiring voicemail server and more than 2 FXO ports, it is required to deploy independent SPA400s (one for Voicemail server and a second for PSTN gateway functionality).
Voicemail ports
• 1 USB 1.1 Host Port for Voicemail prompts and storage
• 32 voicemail accounts
• Two ports when SPA400 is used also for PSTN gateway
• Ten ports when SPA400 is dedicated to Voicemail Server only
Power Requirements
Power Supply
External, 100-240 VAC, 50 to 60 Hz (26-34 VA)
DC Input Voltage (SPA9000)
+5 VDC
DC Input Current (SPA9000)
2A max
Power consumption
5 Watts
Environmental specifications
Operating Temperature
32 to 113ºF (0 to 45ºC)
Non Operating Temperature
14 to 185ºC (-10 to 70ºC)
Operating Humidity
10 to 85% Non-condensing, non-operating
Dimensions
(W x H x D)
5.51 x 5.51 x 1.06 in.
140 x 140 x 27 mm
Weight
0.22 Kg
0.5 lb
Regulatory Compliance
• FCC (Part 15 Class B and Part 68)
• CE
• UL and CB for Power Supply
• NZ Telepermit
• SG IDA
• CCC
• RoHS
• WEEE
Software Specification
Compliance
Note: Many specifications are programmable within a defined range or list of options. Please see the SPA9000 Administration Guide for details. The configuration profile is uploaded on the SPA400 at the time of provisioning
Data Networking
• MAC Address (IEEE 802.3)
• IPv4 - Internet Protocol v4 (RFC 791)
• ARP - Address Resolution Protocol
• DNS - A Record (RFC 1706), SRV Record (RFC 2782)
• DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
• ICMP - Internet Control Message Protocol (RFC792)
• TCP - Transmission Control Protocol (RFC793)
• UDP - User Datagram Protocol (RFC768)
• RTP - Real Time Protocol (RFC 1889) (RFC 1890)
• DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
• SNTP - Simple Network Time Protocol (RFC 2030)
Voice
• SIPv2 - Session Initiation Protocol Version 2 (RFC 3261)
• Voice Algorithms:
• G.711 (A-law and µ-law)
• G.729 A
• DTMF: In-band (RFC 2833)
• Call Progress Tone Generation
• Jitter Buffer - Adaptive
• Frame Loss Concealment
• VAD - Voice Activity Detection w/ Silence Suppression
• Attenuation / Gain Adjustments
• Caller ID Support (Name & Number)
Security
Password Protected Admin and User Access Authority
Provisioning, Administration and Maintenance
• Web Browser Administration & Configuration via Integral Web Server
• Syslog & Debug Server Records
Product Warranty
1-year limited hardware warranty with return to factory replacement and 90-day limited software warranty