Type:UL1277 VNTC power and control cable (Type TC-ER)
Standard:UL1277,UL83,UL66,UL1581,UL1685,ICEA S-58-679,
Cores:2-61
Size: 18AWG-1000kcmil
Voltage: 600V
Construction:
Type TC Control Cable is available in sizes 18 AWG through 10 AWG, with multiconductor constructions of 2 through 61 conductors. The product uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG and Type TFFN conductors is size 16 AWG. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a heat, moisture and sunlight resistant PVC. Non-halogen jacket available upon request.
Applications:
Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired. Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire. Type TC is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations.
THHN, THWN, THWN-2, TW, THW, THW-2, XHHW, XHHW-2, RHH, RHW, MC, TC, TC-ER,USE-2, SE, SO, SOO, UL1007, UL1015,deep well pump cable, irrigation cable
Power TC Cable is used to supply power to motors, or for connection to other power devices in industrial settings.
Power TC Cable is listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits. This cable may be used at temperatures not to exceed 75°C in wet locations and 90°C in dry locations