Structure : To fill the single mode or multi-mode fibers into the PBT loose tube made of high modulus polyester. The inside of the tube is filled with water-proof compounds. The outside of loose tube is longitudinally wrapped with plastic coated steel tapes. Between the steel tape and the loose tube, water-proof material is filled to ensure the compactness and the water resistence of the cable. two parallel steel wires are placed at the two sides of the compound. The compounds and the steel wires are all inside the (PE) outer jacket.
Quantity of fibers: 2 to 12 (even numbers)
Outer PE jacket: 1.8 to 2.5
Loose tube: 2.0 to 2.3
Outer diameter: 7.8mm
Approximate cable weight: 85kg/km
Laying mode: Duct, Aerial
Operating temperature: -40 to +60 deg.C
Application: apply to long-distance communication and the communication between stations
Accurately controlling the extending lengths of the fiber, to ensure good stretch proof performance and adjustibility to the fluctuation of temperatures
Jacket material itself has superior anti-hydrolysis performance and high intensity. Oil jelly is filled inside the tube to offer critical protection to the fibers inside
Specially designed compact cable structure to effectively prevent tube retraction
Good withstand and plasticity
The double side chrome plating steel tape (PSP) increases the moisture permeability of the fiber cable
The two parallel steel wires ensures the tensile strength of the fiber cable
The PE jacket has good anti-ultraviolet radiation performace, and with less diamater and less weight, thus easier to deploy
