1.Product:LDPE (Low-Density Polyethylene)
2.CAS No.: 9002-88-4
3.Model No.: Primary, recycling
4.Appearance: Solid
5.Application: Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination, Extrusion coating, Injection molding
6.Specifications:
It's a low-density, crosslinked, unfilled polyethylene compound desighed for medium cable insulating.
This compound has an extremely low lever of contamination. It's recommend to use are extremely low lever of contamination. It's recommend to use as XLPE insulation for crosslinked polyethylene
If you are interested in our product,just feel free to contact me.
2.CAS No.: 9002-88-4
3.Model No.: Primary, recycling
4.Appearance: Solid
5.Application: Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination, Extrusion coating, Injection molding
6.Specifications:
It's a low-density, crosslinked, unfilled polyethylene compound desighed for medium cable insulating.
This compound has an extremely low lever of contamination. It's recommend to use are extremely low lever of contamination. It's recommend to use as XLPE insulation for crosslinked polyethylene
|
Max conductor temperature:
|
90°C
|
|
Tensile Strength:
|
≥ 13.5Mpa
|
|
Elongation at Break:
|
≥ 350%
|
|
Brittleness temperature:
|
≤ -76°C
|
|
Ageing Properties (Test temperature 135°C, 168h)
Max Variation of tensile strength: Max Variation of elongation at break: |
± 20%
± 20% |
|
Hot Set Test (200°C, 15min, 0.2MPa)
Max elongation under load: Max permanent elongation after cooling: |
≤ 100%
≤ 5% |
|
Dielectric constant (20°C, 50HZ):
|
≤ 2.35
|
|
Dissipation factor (20°C, 50HZ):
|
≤1.0x10(-3)
|
|
Volume Resistance (20°C):
|
≥ 1.0x10(16)Ω.cm
|
|
Dielectric strength:
|
≥ 25Mv/m
|
If you are interested in our product,just feel free to contact me.
Contact name: Mandy
E-mail: zsdchem(at)hotmail.com
MSN: zsdchem(at)hotmail.com