Product Main

Specifications

There are millions of very small areas (10~100 square meters) where people work or live in and suffer from very poor or no mobile signals. People are seeking a cheap and immediate solution that would allow them have clear phone calls or higher speed broad band. However most of the current repeater solutions usually have larger coverage size, and not cost effective.
 
F10F-DB is specifically designed as a "CHEAP" solution to meet this request.
 
1. It supports any two systems of CDMA800, GSM900, DCS, PCS,  CDMA2000, or 
    WCDMA.
 
2. It is quite elegant metal design and can be held in palm, the size is only 
    155*129*30mm.
 
3. The power consumption is only 7W.
 
4. Standard F10F is supplied as a kit, including a donor antenna, a 10 meter long cable
    and a whip antenna.
 
Specification: 

 

Electrical specification 
Uplink
Downlink
Frequency Range
CDMA800
824 ~ 849 MHz
869 ~ 894 MHz
CDMA1900
1850 ~ 1910 MHz
1930 ~ 1990 MHz
GSM850
824 ~ 849 MHz
869 ~ 894 MHz
GSM900 & EGSM
880 ~ 915 MHz
925 ~ 960 MHz
DCS
1710 ~ 1785 MHz
1805 ~ 1880 MHz
PCS
1850 ~ 1910 MHz
1930 ~ 1990 MHz
WCDMA
1920 ~ 1980 MHz
2110 ~ 2170 MHz
AWS
1710 ~ 1755 MHz
2110 ~ 2155 MHz
Max .Gain
≥ 55dB
≥ 60dB
Max .Output Power
≥ 5dBm
≥ 10dBm
Band width (-3dB)
Wide Band
Noise Figure
≤ 6dB
VSWR
≤ 2.0
Group Delay
≤ 1.5μs
Frequency stability
≤ 0.01ppm
Spurious Emission &
Output inter-modulation
GSM Meet  ETSI TS 151 026 V 6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet  IS95 & CDMA2000
WCDMA System
Spurious Emission Mask
Meet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy
≤ 12.5%
Peak Code Domain Error
≤ -35dB@Spreading Factor 256
CDMA System
Rho
ρ > 0.980
ACPR
Meet IS95 & CDMA2000
LED  Alarm
Standard
Power LED
Power Indicator
Mechanical  Specifications
Standard
I /O Port
N-Female
Impedance
50 ohm
Operating Temperature
-25ºC~+55ºC
Environment Conditions
IP40
Dimensions
155x129x30mm
Weight
≤ 1Kg
Power Supply
Input AC90~264V,output 7.5V / 1.2A