Uniaxial Plastic/PP Geogrid
Application:
Uniaxial geogrid is kind of high strength geosynthetic. It has extensive applications in dyke, tunnel, pier, highway, railway and building.
Its main applications are as follows:
1. Enhance roadbed and effectively diffuse its load to improve its stability and bearing capacity and increase service life;
2. Can bear more alternate load;
3. Prevent roadbed distortion and crack caused by the loss of roadbed materials;
4. Increase the self-supporting property of fill behind retaining wall, decrease the earth pressure of retaining wall, save cost, increase service life and reduce maintenance expense;
5. Combine anchor sprouting concrete construction method to give side slope maintenance, which not only saves investment by 30%-50% but also reduces erection time by one time or above.
6. To increase geogrid in the roadbed and surface of highways can reduce flexure, track and put off the flawing appearance by 3-9 folds and reduce the thickness of structural layer by 36%
1. Enhance roadbed and effectively diffuse its load to improve its stability and bearing capacity and increase service life;
2. Can bear more alternate load;
3. Prevent roadbed distortion and crack caused by the loss of roadbed materials;
4. Increase the self-supporting property of fill behind retaining wall, decrease the earth pressure of retaining wall, save cost, increase service life and reduce maintenance expense;
5. Combine anchor sprouting concrete construction method to give side slope maintenance, which not only saves investment by 30%-50% but also reduces erection time by one time or above.
6. To increase geogrid in the roadbed and surface of highways can reduce flexure, track and put off the flawing appearance by 3-9 folds and reduce the thickness of structural layer by 36%
Specifications:
|
Item
|
TGDG50
|
TGDG80
|
TGDG100
|
TGDG120
|
TGDG160
|
|
Raw material
|
pp
|
pp
|
pp
|
pp
|
pp
|
|
Carbon black content(%) >=
|
2
|
2
|
2
|
2
|
2
|
|
Tensile strength(KN/m) >=
|
50
|
80
|
100
|
120
|
160
|
|
Yield Strength at 2% elongation(KN/m)
|
10
|
23
|
30
|
35
|
44
|
|
Yield Strength at 5% elongation(KN/m)
|
25
|
44
|
55
|
65
|
85
|
|
Yield elongation ratrio(%) <=
|
12
|
12
|
12
|
12
|
12
|
|
Length (m)
|
50
|
||||
|
Width (mm)
|
1-3
|
||||
|
Note: The specifications can be customized according to customer’s needs.
|
|||||