According to requirements of customer, special specification and model products can also be desinged and manufactured.
Integral Spiral Blade Stabilizer is devided into Integral 3-Spiral Blade Stablizer, Integral 4-Spiral Blade Stablizer. There are four kinds of abrasive resistant materials on the working surface of stabilizer: Insert tungsten carbide buttons, insert diamond compound body, low temperature welding tungsten carbide pieces, hardfacing electrode on the surface and so on.
Integral Spiral Blade Stabilizer is devided into Integral 3-Spiral Blade Stablizer, Integral 4-Spiral Blade Stablizer. There are four kinds of abrasive resistant materials on the working surface of stabilizer: Insert tungsten carbide buttons, insert diamond compound body, low temperature welding tungsten carbide pieces, hardfacing electrode on the surface and so on.
Type | Working O. D. (in) |
O. D. of Body (mm) |
I. D. (mm) |
Length (mm) |
Connection | |||
String Type | Near Bit Type | |||||||
Top | Down | Top | Down | |||||
WL149 | 5-7/8″ |
121 |
51 |
1200 |
NC38 |
3-1/2REG |
||
WL152 | 6″ | |||||||
WL158 | 6-1/4″ | |||||||
WL165 | 6-1/2″ | |||||||
WL190 | 7-1/2″ | 159 | 57 | 1600 | NC46 |
4-1/2REG |
||
WL200 | 7-7/8″ | |||||||
WL213 | 8-3/8″ |
159 165 |
71 |
1600 1800 |
NC46 NC50 |
|||
WL215 | 8-1/2″ |
159 165 178 |
||||||
WL222 | 8-3/4″ | |||||||
WL241 | 9-1/2″ |
178 197 |
1600 |
NC50 |
NC50 |
NC50 |
||
WL245 | 9-5/8″ | 1800 | 6-5/8REG | |||||
WL251 | 9-7/8″ | |||||||
WL311 | 12-1/4″ |
203 209 |
76 |
1800 |
NC56 6-5/8REG |
NC56 6-5/8REG |
NC56 6-5/8REG |
6-5/8REG |
WL406 | 16″ |
229 241.3 |
2000 2200 |
NC61 7-5/8REG |
NC61 7-5/8REG |
NC61 7-5/8REG |
NC61 7-5/8REG |
|
WL445 | 17-1/2″ | |||||||
WL609 | 24″ | |||||||
WL660 | 26″ | |||||||
WL711 | 28″ |