This equipment can extend and straighten 5mm-12mm round bar and grade 3 steel bar, maximum reducing diameter is 1mm, the maximum speed can reach 180m/min, suitable for construction site, steel bar processing factory. In order not to reduce the property of the steel bar, it should pay attention to the material property specification and qualified the related national standard, while extending and straightening processing.
Technical Parameters: |
Model |
GTS5-14AA |
GTS5-14AB |
GTS5-14AC |
Steel Bar Type |
Round Bar, Grade 3 Steel bar |
Round Bar, Grade 3 Steel bar |
Round Bar, Grade 3 Steel bar |
Material Diameter (mm) |
5-14 |
5-14 |
5-14 |
Maximum Reducing Diameter (mm) |
1 |
1 |
1 |
Maximum Speed (m/min) |
180 |
180 |
180 |
Actual Output (Ton/Month) |
1350 |
1500 |
1800 |
Actual Power Consumption (degree/ton) |
12 |
12 |
12.5 |
Rolling Yield (%) |
99.6 |
99.9 |
99.9 |
Cutting Error (mm) |
±10 |
±10 |
±10 |
Straighten Mode |
Level |
Level |
Level |
Install Area length×width (m×m) |
30×3 |
30×3 |
32×3 |
Installed Capacity (Kw) |
105 |
105 |
106 |
Speed Control Mode |
Frequency Conversion |
Frequency Conversion |
Frequency Conversion |
Straightening Error(mm/m) |
≤3 |
≤3 |
≤3 |
Weight of Equipment (ton) |
9 |
9 |
9.5 |