Sludge tank
|
|
Shape
|
Cylindrical shaped tank with U-sectional external stiffening rings. |
Material
|
Mild steel.
|
Capacity .
|
Sludge tank 15,000L.
|
Shell thickness
|
6mm.
|
Dish thickness
|
6mm.
|
Working pressure
|
-0.9bar underpressure.
|
Tipping cylinder
|
HYVA brand front tipping cylinder with safety support, provided for maximum liquid removal. |
Liquid level indicator
|
Mounted at the rear of the tank.
|
Overpressure safety
|
Overpressure relief valve on tank top.
|
Rear lid
|
Rear lid with hydraulically opening operation and heavy adjustable hinges. Safety Hydraulic check valves with auto check and mechanical hold on upper position. |
Outlet Valve
|
One 150mm ball valve, manual operation.
|
Float over-flow valve
|
Shut-off float system prevents overfilling sludge tank. When the tank’s full, suction hose is closed automatically and a horn signal is activated. |
Vacuum System
Vacuum pump
|
Liquid ring vacuum pump, is driven from the PTO on the gearbox, provides high airflows along with high vacuum levels for removing materials above or below liquid surfaces. Engaged and disengaged from drivers cab. |
Brand
|
KENFLO 2BE1-203
|
Max vacuum level
|
90%
|
Air flow rate
|
1350m3/h.
|
Power requirement
|
50kW.
|
Rotate speed
|
Max 1300r/min.
|
Pump cooling
|
Cooling Water tank in stainless steel 1,000L, mounted just behind the drivers cab. |
Pump protection
|
1)stainless steel ball valve in the tanker;2)filter;3)auto vacuum check valve. |
Suction hose
|
20m length (more length is available), ID 4″rubber hose.
|
Telescopic suction boom
|
Swivel in both the vertical and horizontal plane.
270°horizontal rotation, 6m working radius and vertical lift up to 5.5m above ground. |
Emergency stop
|
An emergency stop is installed on the main control panel
|
Working light
|
1 working light is equipped on the right side of the truck.
|