Reinforced Gabion contains  two types,one is made of reinforced mesh panel (Hereinafter referred to as A ) and the other is added one mesh panel behind the gabion(Hereinafter referred to as A)

A Reinforced mesh panel is to add steel wire mesh panel into wire mesh verticallly or parallelly along the weaving direction when weaving the wire mesh.The material is the same as in the hexagonal wire mesh. Reinforced hexagonal mesh panels has stronger tensile-strength than ones of common hexagonal wire meshes.Besides, the diameter of reinforced wire should be greater than that of edge wire. Under the condition of strong basic tensile stress, reinforced mesh panel will absorb and fundamentally weaken the tensile stress caused by the traffic or the crack.

B Reinforced gabion box is to add mesh panel into the box The gabion boxes are divided into chambers by inserting diaphragms into every meter. Skid resistance will be produced by the friction of the soil mass and the mesh panel. Reinforced gabion box has good enviormental compatibility.

 

 The wire used for making the boxes is thickly plated mild steel. The double-twisted mesh connections of the woven mesh prevent from coming apart if the wire is cut or snaped, in each case, the location of the fault is restricted to the neighbouring areas. The units are attached to each other when using stitching wire and/or staples.

 

Technical Characteristics:

The mesh/wire versions generally used are summarised in the table below. In order to reinforce the structure, all edges are strengthened with a thicker wire. For the sizes and size tolerances about different versions,