Summarization RF Audio controller adopts the advanced micro control unit, it is used for
controlling a variety of lamp whose source of light is LED. For instance, point source of
light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same
time, it has many advantages such as convenient connection, simplicity to use and
others. According to the actual need of customers, it can carry out jumpy changing,
gradual changing, stroboflash and other effects of change.

Technical parameters
● Working temperature: -20-60 ℃
● Supply voltage: 12V, 24V
● Output: 3 channels
● Connectiing mode: common anode
● Transmission/Receiving frequency: 433Mhz
● External dimension: L130ΧW64ΧH24 mm
● Packing size: L145ΧW95ΧH50 mm
● Net weight: 185g
● Gross weight: 220g
● Static power consumption: <1W
● Output current: <4A(each channel)
● Output power: 12V:<144W, 24V:<288W


Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit
can not occur between connecting wire before you turn on the power;
2. Adopt RF control, there are six buttons altogether, and every key-press function is as
follows:
ON/OFF: any state to close load output;
MODE: is the style/color function key, could choose different color changes, 13 total;
Button ¡B+¡: Brightness control of the output signal each press changing speed +1, 256
total.
Button ¡B-¡: each press brightness changing -1
Button ¡S+¡: each press changing speed +1, 100 total.
Button ¡S-¡: each press changing speed -1.
Note: When the external microphone input and audio signal input at the same time,
system will process the audio signal.