A plant with a central turret: maximum reliability and simplicity in use. An ideal machine for high volume production of articles, even of different sizes with similar working cycles. Sturdy construction a minimum maintenance are its principal features. It can be equipped on request with 3 or 4 arms that change station simultaneously, so alternating in the different phases. Many cycle customising possibilities (double loading/unloading station, pre-cooling etc.).
Standard features:
- Internally lighted and sufficiently sized main control board;
- Direct rotation movements guided by sturdy gears, powered by A.C. motors controlled by inverters with ramp regulators in acceleration/deceleration of the rotation speeds;
- Interchangeable arms in one block equipped with an air or inert gas injection system;
- Rapid balancing system for each arm with visual control;
- Thanks to a high-efficiency ventilation system combined with excellent thermal insulation in high non-conductive material, considerable energy saving is achieved;
- Cooling chamber equipped with high-efficiency fans functioning with blown air and atomized water;
- Oven door in modular, thermally pre-formed panels;
- Visual and acoustic alarm circuit;
- Satellite console to facilitate operator functions;
OPTIONS
- Supervision system PC/PLC;
- Water recycling pump;
- Inverter for regulating door opening/closing speed;
- Rapid clutches for arms balance;
- Cooling station with semicircular sliding doors in stainless steel;
- Arms with supplementary airways;
- Software for moulds electronic balance;
- Mobile and fixed work platforms