CNC Reinforcing mesh welding line GWC-2500
Products Introduction:
The equipment for the steel bar mesh welding production lines, can be welded construction with steel mesh, welded moves fast, accurate and reliable. Widely used in building construction (steel bar truss deck) and other fields.
CHARACTERISTICS:
1. CNC wheel-step design to provide high accurate mesh grid(patent).
2. CNC line wire automatic feeding to maximize productivity(patent).
3. Direct circuit to enhance welding quality (patent).
4. Unique high speed air cylinder used on welding electrode to provide hihg reliability.
5. Line wire verical straightening system to provide high quality (patent).
6. Automatic mesh turning, stacking and conveying system.
7. Welding pressure steplessly adjustation to apply multiple wire diameter (patent).
8. Line wire loop and balance system to ensure wire mesh accuracy.
9. Automatically high speed cross wire feeding system (patent).
10. Electrode lift system to extend electrode life (patent).
11. High spped mesh cutting system, 120 times per min.
12. Control systems: SIEMENS, MITSUBISHI, YASKAWA,SCHNEIDER, MOLLER.
Products and Services:
Stirrup bender, rebar shearing line, rebar bending center, wire mesh welding machine, wire straightening and cutting machine, wire cold rolling machine, lattice girder welding machine, butt welder, wire mesh welding machine, Reinforcing mesh, mesh welding machine, welded mesh machine, mesh machinery, steel reinforcing machine, machine mesh, wire mesh welded machine, welding machine, welding line, welding mesh machine, wire mesh machinery etc.
TECHNICAL DATA
Model
|
GWC-2500
|
GWC-2800
|
GWC-3300
|
Installed power(kva)
|
12*150
|
14*150
|
16*150
|
System coltagte(v)
|
380V 50Hz
|
380V 50Hz
|
380V 50Hz
|
Control voltage(v)
|
24V
|
24V
|
24V
|
Power cable cross-sectional area
|
2*(3*185mm²+1*95mm²)
|
3*(3*185mm²+1*95mm²)
|
|
Max.mesh width
|
2500
|
3000
|
3300
|
Line wire spacing
|
≥100mm,multiples adjustable
|
||
Cross wire spacing
|
≥50mm,steplessly adjustable
|
||
Wire diameter(mm)
|
5-12
|
5-12
|
5-12
|
Max.welding capacity
|
12+12
|
12+12
|
12+12
|
Max.wlding speed(time/min)
|
60-100
|
60-100
|
60-100
|
Max.welding spot nos.(group)
|
24
|
28
|
32
|
Pressed air(MPa)
|
≥0.7
|
≥0.7
|
≥0.75
|
Wire feeding method
|
off-coil
|
||
Raw material
|
Cold drawn wire,stainless wire,galvanized wire
|