Product Main

Specifications

[Introduction ]
Cutting machine is the main equipment for Autoclave Aerated Concrete (AAC) products, its necessary core equipments for capacity more than 50000m³/year, it is also necessary to increase the AAC capacity. Our JQF series cutting machine adopts advanced technology, with only one step can cut the cake in six sides, no need of hang the cake for second time, reducing the damage to the cake. So our cutting machines are welcomed all over the country, and gain honors from all our users. After yeas technology innovation, now days, we are able to produce many models of AAC cutting machines.
 
[Working Principle]
Put the cake together with the bottom board onto the overturn plate, and then move to the small slipway near cutting, after turn 90º, the cake will be move to the cutting place from the slipway, then cut the cake in four sides, and crossing cut the cake. After the cutting the cake will back to the overturn plate from the slipway, turn 90 º in reverse direction, the cake will back to the overturn plate, the whole process will finish automatically.
 
[Advantages]
1. Structure compact, easy to operate, less maintenance.
2 .The level cutting and vertical cutting can be finish only once.
3. Cut the cake in 6 sides, the final product accuracy is accord with standard of GB/T11969-1997.
4. Can also satisfy the requirement of producing slab, the final product accuracy is accord with standard of GB15762-1995
5. Can recycle all the waste slurry, no secondary pollution.
6. Cake no conglutination.
7. Level cutting adopt screw drive, solve the original problem of the lack of synchronization by hydraulic transmission.
8. No Limit and interlocked in mechanical systems to prevent accident by the improper operation of the equipment.
9. Have rapid replacement wire device.
10. No defective products.

[Main technical parameters:]
 

number
size
Size of the cake before cutting
Cutting cycle
Capacity
(m3/year)
Cutting precision
(mm)
Power
(kw)
Outer size of the machine
(mm)
1
4M
4050×1240×650
6 block/min
≦100000
six side cutting ﹤±2
34
13800×4200×5600
2
4.2M
4250×1240×650
6 block/min
≦150000
six side cutting ﹤±2
34
13800×4950×5870
3
6M
6050×1540×650
6 block/min
≦200000
six side cutting ﹤±2
37
17500×4600×6000