Product Main

Specifications

                Remote Monitoring your assets in anywhere and anytime!
      Remote switching machines with a free charge call from your phone!     
   
Name: GSM GPRS RTU Telemetry Data Logger 
Model: S240
 
The King Pigeon S Serial GSM GPRS RTU Telemetry Data Logger equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
 
Features:
 1.  Siemens MC35i GPRS Module and High-density performance line ARM 32-bit MCU inside;
2.  Direct connection to the GSM GPRS Network;
3.  Transparent Serial Data Tunneling using low cost SMS/GPRS network;
4.  Remote Configuration by SMS Messages or GPRS;
5.  Upload data via GPRS or SMS on Schedule or event occurs;
6.  Supports Dynamic Domain name or Static IP address;
7.  Supports SMS, GPRS UDP and TCP protocols;
8.  Supports Modbus RTU protocols;
9.  1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port;
10.  6 OPT Coupler (3-24V) Digital Inputs can be programmed to NC/NO/Edge/Level type by switch, Wet Contact and Dry Contact can be programmed by DIP switch, when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;
11.  6 digital inputs can be used as Pulse Counters;
12.  4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;
13.  10 Analogue Inputs. (12 bit resolution, 0-5V or 0-20mA);
14.  User friendly PC Programming Interface, it can remotely program the terminals as well as to  upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;
15.  More Protocols can be updated by user through USB Port with the updated firmware;
16.  Power supply 9V to 24V(Recommend 12VDC);
17.  Size: 168mm*113mm*32.3mm.