MERCEDES BENZ KEY PROGRAMMER
You can program new key (ore used one) in car and programown key if it can not work more. You read and program eeprom of CPU from Steering blocking module via diagnostic connector (38 pins). Desolder and read in programming tool two CPU from Electronic Ignition Control Module. Load these eeproms to program.
Desolder NEC CPU from the key. Solder it on the device , select the No of key and program it. Solder all CPUs on their places and start the car.You can program new keys without the car - only with EIS and steering blocking modules. You can read these CPUs withhelp programming tool (for ex. ETL) for Motorolla CPU 68HC705-16(32)
Need use by Motorola MC68HC908A260 Programmer, MOTOROLA-705X32 PROGRAMMER, MOTOROLA-711 Programmer, MOTOROLA-918 Programmer,VP380
Wholesale and Retail for the product.
The new Mercedes device is working with smart key (old and new) used since 1997 up to 2005 (without Key Less Go system).
You can program new key (ore used one) in car and programown key if it can not work more. You read and program eeprom of CPU from Steering blocking module via diagnostic connector (38 pins). Desolder and read in programming tool two CPU from Electronic Ignition Control Module. Load these eeproms to program.
Desolder NEC CPU from the key. Solder it on the device , select the No of key and program it. Solder all CPUs on their places and start the car.You can program new keys without the car - only with EIS and steering blocking modules. You can read these CPUs withhelp programming tool (for ex. ETL) for Motorolla CPU 68HC705-16(32)
Need use by Motorola MC68HC908A260 Programmer, MOTOROLA-705X32 PROGRAMMER, MOTOROLA-711 Programmer, MOTOROLA-918 Programmer,VP380
Wholesale and Retail for the product.