Equipment name: Precision moving laser marking machin
Equipment model: ETL-M10EPM

Suitable material: 
Fit for all metal, for example, Cu, titanium, steel and so on. Besides,it is also fit for non-metal, for example, ABS, nylon,PES, PVC, PC and so on. This machine is widely use in laser marking,engraving and micro-machining field.
Equipment features: 
EPM series laser machine is the last semiconductor pumped laser machine by Bright Solution in Italy.It is the most advanced
semiconductor pumped laser machine. This equipment adopts integrated design, compact and beautiful configuration. Good beam mode, stability energy,stability performance,credibility utilization and so on.
1. individual design of resonant cavity and pump.
2. all-solid state, and encapsulation designment.
3. high repeat frequency, long working life,and good quality for beam
4. small volume, light weight.
5. low heat dissipating capacity,air cooling
6. can replace the pump laser diode.
Parameter:
Average power:                         5W ; 10W; 20W;
Wavelength:                               1064nm
Repeat frequency:                     10K-100KHz
Pulse width:                                5-25ns
linear polarization:                     100:1
beam quality:                              M2＜1.3; 5W
                                                     M2＜1.5; 10W
                                                     M2＜2.0; 20W
Facula diameter(mm):              ＜1
Mode:                                           TEMOO
Cooling manner:                          wind cooling
Scan range:                                 110mmXll0mn  
Moving marking area:                 500*400mm;
Orientation precision:                 ±0.01mm
Least line width:                           0.01mm
Repeat orientation precision:     0.001mm
Whole power :                              1200W
Control system:                             industry computer
Worktable bearing:                       25kg
Up-and-down area of worktable: 260mm