1. Product introduction

 

Air purification activated carbon uses high quality wood, coconut shell, anthracite as raw materials. Because of depth activation and the special aperture conditioning technology, the product has abundant pore and the pore is a little bigger than toxic gases, the specific surface area greater than 1300 m²/g. It has efficient adsorption capacity to adsorb the toxic gases, such as benzene, formaldehyde, ammonia gas and etc. The product can effectively remove the gaseous contaminant, hazardous materials and odors in indoor air to achieve the purpose of reducing pollution and purifying air.

 

According to different applications, there are two specification products of pellet and columnar activated carbon. The product is easy desorption-regeneration and low cost, and has longer service life than traditional granular or powdered activated carbon, so the users can make a big cost savings. The activated carbon is the best air purification filter material for the energy efficiency or consumers.

Used in industries: deodorization and detoxication of various workplaces, air-conditioning filter, air purifier, central air-conditioning filtration system, air filter, air purifier, auto filter and etc.

         
2. Physical and chemical performance analysis (GB/T 12496-1999) (GB/T 7701.7-1997)

Remarks: The specification can be produced according to customers’ requirements.

 

 

[Packing] Plastic woven bags packed, each 25KG.

[Remarks]The quality indicator not listed can be produced by customers’ requirements.

3. The cautions in transit:

1) In transit the activated carbon should prevent to mixed loading with hard substance, not trample and tread, in case charcoal grain broken to influence the quality.

2) In transit, store, and use process should absolutely prevent flooding, because of after flooding, a significant amount of water is full of activity space to make the activated carbon lose use.

 

3)Prevent tar substance, should ban tar substance into carbon bed, to avoid blocking activated carbon interspace.

 

4) Prevent directly contract with fire in transit, to avoid firing. When activated carbon is regenerating should avoid oxygen entering, and make regeneration thoroughly. After regenerating, must use steam to cool down to 80 degrees Celsius below, otherwise high temperature and encounter oxygen can make the activated carbon ignite spontaneously.