WS-AL2415 12/24V, 6A/10A/15A WELLSEE SOLAR lighting controller (Half power lamp controller, solar street lamp controller) applies in solar photovoltaic lighing system below 360W, which coordinates the working of solar panels, batteries and lamps, and is an important module to the whole system. With its virtues of one-tough process, convenient operation, excellent capability and reliable quality, it is a multifunctional and all-purpose solar cotnroller special for various solar street lamps.
WS-AL2415 12/24V, 6A/10A/15A lighting controller is controlled by Micro-CPU and intelligently senses outside light. It will automatically turn on lights at dark, and turn to high-light automatically after giving the lamp low-light for half an hour. And then turn to morning light when set time is up or at day break. After that, the lamp can be closed automatically after half an hour (the time of high-light can be set.)
The lighting controller also deals with the batteries charge and discharge. When the battery is in low voltage, the lamp will be closed automatically to protect the battery. When it is full, the lamp will be into PWM unstable charge automatically. While at dark, the charging circuit will be turned off to prevent battery discharge through the solar panels. Moreover, this controller has a comprehensive protection circuitry to prevent accidental damage to the controller.
Functions:
1. Light control + time control turn on/off + time control turn on + light control turn on.
2. It can set light intensity to save energy consumption, and really achieve saving the energy
3. It can prevent the battery from over-charging and over-discharging.
4. It can prevent reverse charging (the battery charges the solar panel).
5. It can prevent reverse connection of the battery and solar panel.
6. It will start up the lighting system in the evening automatically according to the intensity of the light.
7. It will shut down the lighting system according to the time setting or shut down the lighting system automatically when it is dawn.
Indicator Light:
The controller has a three color battery power indicator LED light, and a green load indicator light.They indicator of the working condition of charging and discharging:
ü Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly; flickeringly means floating charge, no light means stop charging.
ü Load Indicator LED (mark: Light). When it is bright, there is output and load can work; if LED goes out, means there isn’t output and the load cannot work.
Battery indicator: red under =voltage Green =full Yellow =normal
The Parameter Sheet:
Model
|
WS-AL2415 6A
|
WS-AL2415 10A
|
WS-AL2415 15A
|
System voltage
|
12V/24V Automatic distinguish voltage
|
||
Max charge current
|
6A
|
10A
|
15A
|
Max discharge current
|
6A
|
10A
|
15A
|
Charge off voltage(HVD)
|
14.4V/28.8V
|
||
Low Voltage Directive(LVD)
|
10.8/21.6V
|
||
Low Voltage Restore(LVR)
|
11.8V/23.6V
|
||
Light operate
|
light control turn on + light control turn off
|
||
Light time control
|
Light control turn on/off + time control turn on/off
|
||
Time control classification
|
0.5 hours started, half an hour of one grade, up to 10 hours
|
||
Out put route
|
single bulb
|
||
Ambient temperature
|
-25℃-+55℃
|
||
Safe degree
|
IP55
|
||
Quiescent dissipation
|
24mA
|
||
Max loop voltage drop
|
350 mV
|