Function:
Main Features
♦ Suitable for flat .cap embroidery and finished garments embroidery High speed up to 1000 RPM.
♦ 3.8inch TFT Ture Color Displayer , Modern Design of operating panel, USB input port , Color LCD display showing real time stitching , Pre-sew design trace capable Emergency stop
♦ New Servo Driver For Frame
♦ Color-Change Mode: Step Color-change , Automatic Color Change
♦ Thread Trimming system: Automatic Thread Trimmer, Solenoid thread holding, step motor thread trimming and catching.
♦ Needle Position Detecting : Rheostat
♦ Thread Break Detecting : Thread break detection ,Thread take-up spring or chopping wheel
♦ Memory: 1 Million , Design Number :99
♦ Language: Chinese, English, Turkish, French, Spanish, Portuguese
♦ Data Transfer Floppy Disk: Pattern input/output support USB updating.
♦ Network Function: Support multi-machine network, data transfer, state monitoring, operating though network.
♦ 270° wide cap frame unit
♦ Electricity:110V/60Hz or 220V/50Hz available
1. 110V or 220V self-adaptable power supply. No more external power box needed.
2. Only 150W power consumption.
3. Mainboard is built into the control panel, which reduces the possibility of damage by dust or external force.
4. Support large capacity of USB flash drive from 2G and up with faster data transmission and more compatibility
5.Proper shut-down function powers off only moving parts such as X&Y axis and needle bar, but still keeps the data on screen when the emergency button is pushed.
6. Precise digital degree on stop point: main shaft can be turned to any angle digitally with the number of degrees shown on the screen.
7. Cap to flat (or vise versa) embroidery mode switch eliminating the possibility of hitting the frame.
8. Keeping original file names in memory makes it easy to manage designs.
9. Lay-out of keys on panel is more user-friendly.
Hoops/Frames Included
♦ 2 x Shirt Front Round Hoop 9 cm (3.5")
♦ 2 x Shirt Front Round Hoop 20 cm (9")
♦ 2 x Shirt Front Round Hoop 12 cm (4.7")
♦ 2 x Jacket Back Square Hoop 29 x 29 cm (12" x 12")
♦ 2 x Shirt Front Round Hoop 15 cm (5.9")
Accessories Included:
Table and stand with wheels for easy moving around.
Exploded View of Machine .
Operation Manual .
Tool Kit.
Main Features
♦ Suitable for flat .cap embroidery and finished garments embroidery High speed up to 1000 RPM.
♦ 3.8inch TFT Ture Color Displayer , Modern Design of operating panel, USB input port , Color LCD display showing real time stitching , Pre-sew design trace capable Emergency stop
♦ New Servo Driver For Frame
♦ Color-Change Mode: Step Color-change , Automatic Color Change
♦ Thread Trimming system: Automatic Thread Trimmer, Solenoid thread holding, step motor thread trimming and catching.
♦ Needle Position Detecting : Rheostat
♦ Thread Break Detecting : Thread break detection ,Thread take-up spring or chopping wheel
♦ Memory: 1 Million , Design Number :99
♦ Language: Chinese, English, Turkish, French, Spanish, Portuguese
♦ Data Transfer Floppy Disk: Pattern input/output support USB updating.
♦ Network Function: Support multi-machine network, data transfer, state monitoring, operating though network.
♦ 270° wide cap frame unit
♦ Electricity:110V/60Hz or 220V/50Hz available
1. 110V or 220V self-adaptable power supply. No more external power box needed.
2. Only 150W power consumption.
3. Mainboard is built into the control panel, which reduces the possibility of damage by dust or external force.
4. Support large capacity of USB flash drive from 2G and up with faster data transmission and more compatibility
5.Proper shut-down function powers off only moving parts such as X&Y axis and needle bar, but still keeps the data on screen when the emergency button is pushed.
6. Precise digital degree on stop point: main shaft can be turned to any angle digitally with the number of degrees shown on the screen.
7. Cap to flat (or vise versa) embroidery mode switch eliminating the possibility of hitting the frame.
8. Keeping original file names in memory makes it easy to manage designs.
9. Lay-out of keys on panel is more user-friendly.
Hoops/Frames Included
♦ 2 x Shirt Front Round Hoop 9 cm (3.5")
♦ 2 x Shirt Front Round Hoop 20 cm (9")
♦ 2 x Shirt Front Round Hoop 12 cm (4.7")
♦ 2 x Jacket Back Square Hoop 29 x 29 cm (12" x 12")
♦ 2 x Shirt Front Round Hoop 15 cm (5.9")
Accessories Included:
Table and stand with wheels for easy moving around.
Exploded View of Machine .
Operation Manual .
Tool Kit.
[Example of model code]
SINSIM-C (a), 9 (b), 01 (c)
Contents of model code : a=model name,
b=number of needles,
c=number of heads