Variable spring pipe hanger and support
|
||||
58H,58 V and 80V Constant Force Spring Hangers(US ITT Technology)
|
||||
Classification
|
Model Code
|
Installation Form
|
||
Horizontal Type Constant Force Spring Hangers
|
58H
|
A Type,B Type,C Type,E Type,G Type
|
||
Vertical Constant Force Spring Hangers
|
58V
|
A Type,B Type,C Type,D Type,E Type
|
||
Support Type Constant Force Spring Hangers
|
80V
|
F Type
|
||
A Type-Duplex Pull Rod Connection
|
D Type-Top Surface Connection
|
|||
B Type-Single Hanger Plate Connection
|
E Type-Pedestal Connection
|
|||
C Type-Double Hanger Plate Connection
|
G Type-Parallel Connection of Constant Force Spring Hangers
|
|||
1.Applicable Range
|
||||
The 58H, 48V and 80V constant force spring hangers (US ITT Technology)are applicable to 38mm(1 1/2")to 508mm (20")displacement, 12.7mm(1/2")interval and 12daN to 39,690daN loading capability.
|
||||
2.Classification and Model
|
||||
|
||||
Product details
|
||||
Material:carbon steel,stainless steel,alloy steel and special material for the special parts.
|
||||
Size:according to the drawing or requirement
|
||||
Standard:ISO,JIS,DIN,GB
|
||||
Application:support pipe and equipments subject to vertical movement.
|
||||
Displacement range:VS(0--180)
|
||||
TD:(0-120)
|
||||
Load range:154-217384N
|
||||
Temperature range:-20-- +200
|
By minor vertical travel of piping and related components due to thermal expansion, spring hangers and supports are used to provide elastic load transfer.
The functioning of these components is based on preset helical coil springs which exert a variable supporting load over the whole range of movement corresponding to the given spring characteristics.
Saiho spring hangers and supports meet the requirements of consistent performance and maintenance free operation via the following features:
The functioning of these components is based on preset helical coil springs which exert a variable supporting load over the whole range of movement corresponding to the given spring characteristics.
Saiho spring hangers and supports meet the requirements of consistent performance and maintenance free operation via the following features:
Saiho spring hangers and supports are preset at works to the installation load and blocked in both directions of movement. Blocking is necessary to take up additional loads during pickling, flushing, or hydrostatic test. The factory settings are carried out on electronically controlled test benches:
values set at the factory are stamped onto a reveted plate.
the installation position is marked on the travel scale.
cold and got settings are marked on the travel sclae with white and red sticker respectively.
the blocking device can be blocked in any position. The blocking pieces can be reinserted in any required position.
Deliveries of approximately 1,000,000 Saiho spring hangers and supports worldwide demonstrate their particular reliability.
surface protection through galvanized finish
values set at the factory are stamped onto a reveted plate.
the installation position is marked on the travel scale.
cold and got settings are marked on the travel sclae with white and red sticker respectively.
the blocking device can be blocked in any position. The blocking pieces can be reinserted in any required position.
Deliveries of approximately 1,000,000 Saiho spring hangers and supports worldwide demonstrate their particular reliability.
surface protection through galvanized finish