Press Brake Product feature:
1. The C-body design, whole body cast, high rigid.
2. The stroke position Controlled by Grating and location accuracy.
3. With PLC and the proportional valve control; each stroke , pressure , speed and packing time are all accurate.
4. Set the machine action Conveniently and flexible by way of Touch-screen.
With PLC control, easy programming process control action.
5. Real time testing pressure with the pressure sensor, reflecting the product’s qualify ,press-fit too tight or too loose can be noticed by warning system.
6. Key and Foot Switch two cycle start modes. Pressure Speed and time can be adjusted.
7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
8. Infrared protection can be configured (Optional).
1. The C-body design, whole body cast, high rigid.
2. The stroke position Controlled by Grating and location accuracy.
3. With PLC and the proportional valve control; each stroke , pressure , speed and packing time are all accurate.
4. Set the machine action Conveniently and flexible by way of Touch-screen.
With PLC control, easy programming process control action.
5. Real time testing pressure with the pressure sensor, reflecting the product’s qualify ,press-fit too tight or too loose can be noticed by warning system.
6. Key and Foot Switch two cycle start modes. Pressure Speed and time can be adjusted.
7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
8. Infrared protection can be configured (Optional).
Technical Parameters:
Theoretical output pressure 50KN(5t)
Rated oil pressure 10Mpa
Max stroke 150mm
Max Opening Height 350mm
Throat Depth 150mm
Max Fast-forward speed 110mm/s
Feeding speed 10~110mm/s
Max Return speed 130mm/s
The size of the working table 410 X 280mm
The height of the working table 720mm
Size of the mold mounting hole Φ32mm
Power of motor 3.7kw
Power(3ΦAC,50Hz)380V
Weight 550kg
Theoretical output pressure 50KN(5t)
Rated oil pressure 10Mpa
Max stroke 150mm
Max Opening Height 350mm
Throat Depth 150mm
Max Fast-forward speed 110mm/s
Feeding speed 10~110mm/s
Max Return speed 130mm/s
The size of the working table 410 X 280mm
The height of the working table 720mm
Size of the mold mounting hole Φ32mm
Power of motor 3.7kw
Power(3ΦAC,50Hz)380V
Weight 550kg
Our range of hydraulic press have a longer service life.They can be customized as per the specific needs of the customers.