Features of Triple-layer co-extrusion dry-cure CCV lines(6-35KV, 35KV-123KV)
1.Controlled by computer and operated by touch srceen, communicates with profibus.
2.Adopt ¢65 conductor shield, ¢150 insulation, ¢90 insulation shield, triple-layer co-extrusion.
3.Controlled by field density,shifting phase trigger function of tubes.
4.The specially designed triplelayer coextrusion crosshead ensure the joint speed raising not to eccentric after modulating with low speed and can made finished cable after 30-40m.
5.The manmachine communicate menu can deposite the technological parameter to use at any moment.
6. Sag control. The working principle is of contactless type with the features of narrow band emission, strong signal, weak signal receiving and high anti-interference ability, used widely DC speed governing and AC frequency conversion control.
1.Controlled by computer and operated by touch srceen, communicates with profibus.
2.Adopt ¢65 conductor shield, ¢150 insulation, ¢90 insulation shield, triple-layer co-extrusion.
3.Controlled by field density,shifting phase trigger function of tubes.
4.The specially designed triplelayer coextrusion crosshead ensure the joint speed raising not to eccentric after modulating with low speed and can made finished cable after 30-40m.
5.The manmachine communicate menu can deposite the technological parameter to use at any moment.
6. Sag control. The working principle is of contactless type with the features of narrow band emission, strong signal, weak signal receiving and high anti-interference ability, used widely DC speed governing and AC frequency conversion control.
Technical parameters of of Triple-layer co-extrusion dry-cure CCV lines (6-35KV, 35KV-123KV)
|
Voltage class
|
XLPE: 6-35KV
|
XLPE: 35-132KV
|
|
Conductor sections
|
Copper: 35-630mm2
|
Copper: 50-1600mm2
|
|
|
Aluminum: 50-800mm2
|
Aluminum: 70-1600mm2
|
|
Max. cable weight
|
10kg/m
|
16kg/m
|
|
Max. diameter
|
Ф75mm
|
Ф95mm
|
|
Tube layout
|
Half-catenary
|
Half-catenary
|
|
Nitrogen
|
Pressure: 2.0-2.5Mpa
Purity: 99.5%
|
Pressure: 2.0-2.5Mpa
Purity: 99.5%
|
|
Consumption
|
Standard atmoshpencpressure
Volume of nitrogen tank: 5m3
|
Standard atmoshpencpressure
Volume of nitrogen tank: 5m3
|
|
Cooling water
|
Pressure: 0.2-0.6Mpa
Circulation: 25m3/h
|
Pressure: 0.2-0.6Mpa
Circulation: 25m3/h
|
|
Compressed air
|
Pressure: 0.6-0.8Mpa
Normal dosage: 0.8m3/h
|
Pressure: 0.6-0.8Mpa
Normal dosage: 0.8m3/h
|
|
Installed capacity
|
750KVA-930KVA
|
900KVA-1080KVA
|
|
Total weight
|
80t-90t
|
100t
|
Our 132KV CCV line uses upper and lower rotating caterpillars, ETH avoiding eccentricity, advanced international technology based on our 35KV CCV line and our abundant experience in CCV line industry to keep the line advanced, high efficient and running stable.