Product Main

Specifications

Cable For Welding Machine (HanBa line)
 
 
model
specifications
mm
kg/km
A
 
 
Cable diameter
Theoretical weight
Load flow
 
 
 
 
YH
16
10.26
219
243.27
 
 
25
11.67
317
343.34
 
 
35
12.92
426
452.90
 
 
50
15.17
592
630.50
 
 
70
17.90
790
861.32
 
 
95
19.95
1066
1137.22
 
 
120
22.42
1348
1437.75
 
 
150
24.75
1649
1782.75
 
 
185
 
1984
 
 
 
Use requirement:
(1) YH cable is in low voltage (highest voltage of 200 V) large current under the working conditions of, should have some patience.
(2) HanBa line cable long-term allowed to work temperature should not exceed 65 ℃.
(3) motor lead wiring cable frequently, and move around and cast, requirements soft, bending good performance.
(4) in the cast by sharp steel components of easy wind, brush, so demand cable insulation resistance, wear resistance and mechanical properties of the tear.
(5) use environmental conditions, such as sun exposure, water complex boiling, contact the mud, oil, acid and alkali liquid, request has the certain resistance, oil resistance, climatic and solvent resistance.
(6) sometimes run into heat welding parts, anti-thermal-distortion requirements.
(7) often move, request small diameter, light weight. Because this type of cable performance demand is not high, and the use of the environment condition is complex, on the structure of the complex requirements to satisfy various environmental factors is not appropriate. When using attention to improving conditions of use, in order to prevent foreign damage.