|
Model
|
SN-252C
|
|
Needle bed
|
Length: 52"
|
|
The steel needles are inserted on the needle bed. Replaceable Segment can be available when broken down.
|
|
Knitting width
|
Variable stroke. Max 52"(132mm)
|
|
Gauge
|
3G,5G,7G,multi-gauge3-5-7G,8G,9G, 12G,14G,16G
|
|
Knitting speed
|
Knitting speed varies according to gauge and knitting condition.MAX.1.2m/sec.,32 speed selection programmable command control.
|
|
Knitting system
|
One carriage with double system with setup comb system
|
|
Knitting cam
|
Composite design. Each system can perform Loop+tuck+not knitting simultaneously.
|
|
Transfer cam
|
Compound Knitting cam system, each system can transfer from the front to rear, rear to front or both front and rear simultaneously without direct restriction .Auto racking and auto receive.
|
|
Stitch cam
|
Each stitch setting is controlled by a stepping motor .It has 24 stitches of independent selections and each of them range from 00-99 steps for knitting pattern.
|
|
Needle selection
|
Each system has 4 sets hi-tech needle selectors. Double cam system equips with totally 8 sets needle selectors, which can be installed or removed simply from the carriage and maintained easily.
|
|
Yarn carriers
|
2*8 sets yarn carriers on 4 double side rails,switchable in any area within the knitting width.Also can be equipped with intarsia yarn carrier for intarsia pattern.(Optional device).
|
|
Sinker system
|
This system composes by two additional pieces of sinker needle bed. The sinker presser degree is adjustable the positions by knitting program command.
|
|
Racking system
|
Servo motor control,the programmable racking positions within 2 inches,each also has 1/4,1/2and 3/4 micro adjustable positions.
|
|
Main take down roller
|
32 levels changeable tensions selection, adjustable automatically on each level. Can change the roller tension on the operation panel.
|
|
Carriage drive system
|
AC servo motor control,tooth shape driving belt,32 section speeds limited built in. Knitting speed can be changed flexible depends on the knitting requirement.
|
|
Stop motion
|
Yarn breaking,knot,press off,needle break,yarn float,roll back,wrong racking,wrong sinker position,needle shock, excessive yarn,and reaching on production target offer, the machine will automatically stop.
|
|
Controller
|
Built-in controller. Data input by hand or USB memory disc. Stored program for flat knitting machine.
|
|
Memory capacity
|
1024×4096 hung memory for the width and pattern length design.
|
|
Setup comb system
|
Single carriage with double system and setup comb system. These C-series machines are all equipped with the advantage comb device (including clip and cutter). The comb device adopt activity releasing theorem, which achieves the compose needle to pick up yarn or release yarn. The comb with clip and cutter is complement to each other, both to cooperate with each other. Which give full pay completely due action and reduce the waste yarn and increase the production efficiency. These series are used digital technology to achieve the patterns of transfer, tuck, pointel, intarsia, jacquard, apparent narrowing, hidden narrowing and other regular pattern knitting functions, can knit basic single or double jersey plain fabric, irregular multi-colors jacquard, intarsia, cable and pointel structure patterns. |
|
Data input
|
USB memory interface.
|
|
Language display
|
English and Chinese are standard versions. Other languages can be supplied with customer’s request.(Optional software)
|
|
Power supply
|
One phase AC 220V 1.2 KVA
|
|
Dimension & Weight
|
Length*Width*Height: 290*90*200cm. Net weight:1500kg.
|
