|
Model
|
SN-252S
|
|
Needle bed
|
Length: 52"
|
|
The steel needles are inserted on the needle bed. Replaceable Segment can be available when broken down.
|
|
Knitting width
|
Variable stroke. Max 52"(132mm)
|
|
Gauge
|
3G,5G,7G,multi-gauge3-5-7G,8G,9G, 12G,14G,16G
|
|
Knitting speed
|
Knitting speed varies according to gauge and knitting condition.MAX.1.2m/sec.,32 speed selection programmable command control.
|
|
Knitting system
|
One carriage with double system equips with high-position roller
|
|
Knitting cam
|
Composite design. Each system can perform Loop+tuck+not knitting simultaneously.
|
|
Transfer cam
|
Compound Knitting cam system, each system can transfer from the front to rear, rear to front or both front and rear simultaneously without direct restriction .Auto racking and auto receive.
|
|
Stitch cam
|
Each stitch setting is controlled by a stepping motor .It has 24 stitches of independent selections and each of them range from 00-99 steps for knitting pattern.
|
|
Needle selection
|
Each system has 4 sets hi-tech needle selectors. Double cam system equips with totally 8 sets needle selectors, which can be installed or removed simply from the carriage and maintained easily.
|
|
Yarn carriers
|
2*8 sets yarn carriers on 4 double side rails,switchable in any area within the knitting width.Also can be equipped with intarsia yarn carrier for intarsia pattern.(Optional device).
|
|
Sinker system
|
This system composes by two additional pieces of sinker needle bed. The sinker presser degree is adjustable the positions by knitting program command.
|
|
Racking system
|
Servo motor control,the programmable racking positions within 2 inches,each also has 1/4,1/2and 3/4 micro adjustable positions.
|
|
Main take down roller
|
32 levels changeable tensions selection, adjustable automatically on each level. Can change the roller tension on the operation panel.
|
|
Carriage drive system
|
AC servo motor control,tooth shape driving belt,32 section speeds limited built in. Knitting speed can be changed flexible depends on the knitting requirement.
|
|
Stop motion
|
Yarn breaking,knot,press off,needle break,yarn float,roll back,wrong racking,wrong sinker position,needle shock, excessive yarn,and reaching on production target offer, the machine will automatically stop.
|
|
Controller
|
Built-in controller. Data input by hand or USB memory disc. Stored program for flat knitting machine.
|
|
Memory capacity
|
1024×4096 hung memory for the width and pattern length design.
|
|
Data input
|
USB memory interface.
|
|
Language display
|
English and Chinese are standard versions. Other languages can be supplied with customer’s request.(Optional software)
|
|
Power supply
|
One phase AC 220V 1.2 KVA
|
|
Dimension & Weight
|
Length*Width*Height: 290*90*200cm. Net weight:1500kg.
|
