spec of 700cc ATV:
spec of water mist system:
| Type | 686cc,Water cooled,4-stroke,1-cylinder |
| Bore x Stroke | 102mm x 84mm |
| Compression Ratio | 9.2:1 |
| Max. Power | 25kw(33.50hp)/5000-5500rpm |
| Max.Torque | 49N.m/5000rpm |
| Carburetion | PD42J |
| Ignition | CDI |
| Starting | Electric/pull start |
| Transmission | L-H-N-R-P |
| Drive Train | Axle |
| Suspension | Independent double swing arm |
| Suspension/Rear | Independent double swing arm |
| Brakes/Front | Dual ventilated hydraulic disc |
| Brakes/Rear | Ventilated Hydraulic disc |
| Tires/Front | AT25 x 8-12 radial |
| Tires/Rear | AT25 x 10-12 radial |
| L x W x H | 2250mm x1280mm x 1225mm |
| Seat Height | 930mm |
| Wheelbase | 1365mm |
| Ground Clearance | 260mm |
| Fuel Capatity | 17L |
| Dry Weight | 329kg |
| Lighting | 12V35W/35W x 2,12V5W x 2(front);turning light 12V10W x 4(F&R); 12V.5W/21W x 1(rear) |
spec of water mist system:
| Engine type | Honda GX 160 4.8 HP petrol engine with both electric and manual start |
| Engine performance | 3,600 revolutions per minute |
| Engine fuel tank capacity | 3.6 litres, sufficient for 3 hours of operation at full output |
| Pump | Self priming membrane pump |
| Pump pressure | Preset at 37 bars (recommended pressure) |
| Nozzle pressure | 23 bars at pump pressure of 37 bars and 50 metre hose |
| Lance measurements | 65 cm long, 3.5 kg |
| Spray options | Micro-drops or jet stream of aspirated foam as selected by operator with instant change |
| Stream options | Continuous stream or manual pulsing |
| Range | 15 metres (micro-drops and foam) at 50 metre hose |
| Drop size (micro-drops) | 7-100 microns |
| Water tank | 180 litre water tank |
| Flow | 24 litres per min. (micro-drops), 120 litres per min. (aspirated foam) |
| Foam system | Integrated foam system with 12 litre foam container |
| Recommended foam solution | 3% AR-AFFF (alcohol resistant) foam solution |
| Foam expansion | Low expansion rate, approximately 1:5 |
| Hose | 50 metre ½” hose on reel with manual rewind |
| Corrosion resistance | Housing of pump driven unit – powder coated aluminium Base plate of pump driven unit – stainless steel type |
| Electrical requirement | 12 volt, min. 36 AH recommended |
| Dimensions (D x W x H) | 50 x 42x 36 cm (pump driven unit) 43 x 25 x 40 cm (hose reel with 50 metre hose) |
| Weight | 106 kg (pump driven unit, hose reel with 50 metre hose, lance) |
| Fire fighting capability | Able to fight class A, B, C and E fires |