Wholesale New Smart PCI LED Indicator diagnosis Debug Cards
Specifications:
1.English Display Errors
2.Smart Motherboard test card
3.Fault code DEBUG Card
4.Computer Diagnostic Card
2.Smart Motherboard test card
3.Fault code DEBUG Card
4.Computer Diagnostic Card
Product introduction:
This product use the latest technology in Taiwan, it not only can display PCI code, also can give the intelligent analysis results of fault code in English, Compared to traditional digital diagnosis card more efficient, the non-professional maintenance personnel can achieve more with less effort.
"The meaning of special code "00" and "FF":
(1) "00" and "FF"Finaly displayafter show other code,it says the BIOS complete self-inspection.
(2)The screen display "00" , "FF","- -" when turn on the computer,please check the CPU or power of computer.
Working principle:
BOIS will check the system circuit,keyboard, video, hard disk and the other hardware,and analysis system configuration of hard disk,to have the basic configuration of I/O setting, all normal initialized, guide the operating system.When you use the card,first to chose the type of BOIS,second,turn on computer.If the computer hardware failures occur,the card will not only display the code,and show the diagnosis details in English.
User Manual:
Smart PCI LED Indicator diagnosis Debug Card
1.set the top left switch to chose right BOIS of the PC main board.
2. Plug the card into PCI slots of board,when turn on computer the card will display:"Final code:XX and Upeer code:"XX",after 1s stay the LCD will show the solution of Final code,As shown in figure."
3. Indicator LED will show the state of the power on board,table 1 is the detail of state.
12 V
|
PCI slots 12V supply indicator LED
|
-12V
|
PCI slots -12V supply indicator LED
|
5V
|
PCI slots 5V supply indicator LED
|
3.3V
|
PCI slots 3.3V supply indicator LED
|
CLK LED
|
When hour clock output, weak light
|
SYs LED
|
System indicator light , flash in the normal condition.
|
BOIS key
|
Check present "BOIS" for short time press ; Shift "BOIS" with a long time press
|
Attention:
LCD display "Final code:- - and Upeer code:- -"if the main board don't work.If the screen without any display, please check the 3.3V output of the computer power.Suggest you change another PCI slot when fail to get code