1.The C-body design, whole body cast, high rigid.
2. With a filling valve, have a high speed.
3. Key and Foot Switch two cycle start modes.
4. With PLC control, easy programming process, positioning accuracy and high precision.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
7. Infrared protection can be configured (Optional).
Technical Parameters
Theoretical output pressure 63KN(6.3t)
2. With a filling valve, have a high speed.
3. Key and Foot Switch two cycle start modes.
4. With PLC control, easy programming process, positioning accuracy and high precision.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
7. Infrared protection can be configured (Optional).
Technical Parameters
Theoretical output pressure 63KN(6.3t)
Rated oil pressure 12Mpa
Max stroke 150mm
Max Opening Height 230mm
Thoat depth 160mm
Fast-forward speed 80mm/s
Feeding speed 10~80mm/s
Return speed 90mm/s
The size of the working table 520 X 310mm
The height of the working table 640mm
Size of the mold mounting hole Φ22mm
Power of motor 2.2kw
Power(3ΦAC,50Hz)380V
Weight 650kg
All the kinds of oil hydraulic marchine can bespoken by customers' demands.
All the kinds of oil hydraulic marchine can bespoken by customers' demands.