drier is a cylinder,its main body is a litte bit slantwise,and the rotate speed can be adjusted within bounds.Wet raw materials are sent into cylinder, the materials are well-distributed and dispersed after be turned over by shovelling  plate,then the materials contact with the hot air fully,the drying is accerlated.Shovelling plate can be selected to meet different materials

 

     This dryer is particularly suitable for drying big granules in chemicalindustry,minerals,metallurgy industry,and so on.It can also dry special powder and granule material,such as  lightweight calcium carbonate,floridin,magnetic particle,graphite,and dregs of a decoction ,the drying temerature   should be low, and the raw material should be dried continuously in large scale

 

 

    technical parameter

item(m)	priductive capacity(t/h)	revolution(r/min)	motor power(Kw)	install angle(.)	Temp.of final
Φ1.0×5.0	0.5-1.2	0.6-6	4	3-5	≤1.5%
Φ1.2×6-10	1.5-3	0.6-6	5.5	3-5	≤1.5%
Φ1.5×12-18	3-5.5	0.6-6	15	3-5	≤1.5%
Φ1.8×12-18	5-6.5	0.6-6	18.5	3-5	≤1.5%
Φ2.2×12-22	7-12	0.6-6	22	3-5	≤1.5%
Φ2.4×15-20	9-15	0.6-6	30	3-5	≤1.5%
Φ3.0×25	16	0.6-6	55	3-5	≤1.5%

model	heat direct and sequence		heat direct and retrograde		compound heating
type of material	mineral	HP		ammonium sulphate	phosphorus fertilizer	coal
capacity kg/h	1000	-66	15000	20000	12000	5000
primary moisture %	30	13	6	1.5	5	6.5
final moisture %	15	0.3	1	0.1	0.1	0.1
average dim. mm	6.5	0.05	4.7	0.5-0.7	0.5	5
thickness of material mm	770	800	1890	1100	1500	750
capacity of hot air kg/h	39000	5400	10750	9800	6500	16000
temp. of air in	600	165	500	180	650	570
temp. of material out		42	100	70	80	75
heating style	gas	steam electric+heating	heavy oil	coal fuel furnace	heavy oil	heavy oil
ratio of feed		6.3	7	7.5	7.8	18
rotation speed rpm	4	4	3.5	3	4	2
angel .	0.04	0.005	0.03	0.05	0.05	0.043
quatity of oar	12	24	12	22	8 16	6 12
dim. of drier m	2.0	1.5	2	2.3	2 0.84	24 0.95
length of drier m	20	12	17	15	10	16
driving power kw	22	7.5	15	11	11	15