• Video transmission via UTP CAT5 cable.
• Over 10-20% wire costs saved.
• Full-motion CCTV video at distances up to 2000ft B/W(600m), 1500ft Color (400m)
• Building video filter and loop termination circuit
• 'HUM-BARs' rejective video BALUN transceiver
• Outstanding interference rejection and transient protection.
• Building in lightning protection glass/ceramic gas tuber (Engineer/Enhance Model: UST102BP UST102EP).
• Male BNC with 150mm coaxial cable allows connection directly to the camera or DVR.
• No power required.
• Up to 3,000ft (1km) with active receiver or hub.
• For more information, please contact with authorized distributors.

Attenuation
DC to 5 Mhz: 1.5 dB max

Common-mode rejection
15KHz to 5 Mhz: 60 dB typ

Impedance
Coax Cable, Male BNC75 ohms
UTP, Screw Terminals 100 ohms

Wire Type
Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal
Category Type: Cat 2 or better
Impedance: 100 ± 20 ohms
DC Loop Resistance: 26 ohms max
Differential Capacitance: 19 pF/ft max
Wire Length, camera to monitor including coax, 1,000 ft (300 m), can be up to 2000ft max (600m) B/W signal

Connector Interfaces
Video: Male BNC connector with 150mm coxial cable
Network Interface: 2 Screw Terminals for UTP pair cable

Environmental
Temperature: 0 to +50° C
Humidity (non-condensing): 0 to 95%
ESD Susceptibility (200 pf probe) : 20 KV

Mechanical
Dimensions no excluding BNC: 22*36*38mm with 150mm coxial cable
Weight: 30g
Material: Black ABS
Mounting: No needed