Ground Loop Isolator Mounting Rack Panel

19", 2U standard metal mounting rack panel
up to 11units mounting, module installation

Multi Port Mountable Ground Loop Isolators

19", 2U standard metal mounting rack panel
1 to 11units mounting, module installation

Features

Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, differences in ground potentials are typically caused by unbalanced power line loads

• Can effectively suppress interference AC power and uneven ground caused by various factors such as interference
• Address issues such as picture interference
• In the harsh environment to ensure the quality of video transmission, stable and reliable
• Can balance the DVR video sync signal value
• Used in the coaxial openings can balance the impedance mismatch problem
• Effectively extend the transmission distance and other characteristics
• Input/Outp with two mini cable BNC-F/M connectors- UST100GLI/B
• Input/Outp w/mini cable BNC-M/Screw Terminal connectors- UST100GLI/B

Specification

• Insertion Loss: less 0.5dB
• Frequency Response: 0-3dB range in 20Hz to 12MHz
• CMRR: 58dB @ 1MHz
• Differential phase: less than 2 degrees
• Differential gain: less than 2%
• S/N ratio: >60dB
• Ground loop circuit isolation: >90dB and >50Hz
• DC loop resistance: 18 ohms/100m
• Isolation Voltage: 600VDC (Min)
• Input Resistance: 75 ohm
• Output Resistance: 75 ohm
• Insulation Resistance: 100M ohm
• Build in external paasive isolation circuit with isolation transformer,
  DC video input signal saturation rejection, line termination for 'Hum Bar' rejection, common & differential mode noise LPF filter
  perfect to DVR to immunity interference, for extra interference rejection(UST100GLIB)
• Two 165mm mini cable with BNC Female and BNC-Male input / output (for isolated equipment) connectors
  Passive, no power required.
• Prevents video-signal distortion caused by video ground loops.
• Eliminates picture tearing, cross talk and rolling.
• Prevents power cables laid by others interfering with the CCTV system.
• Built in TVS (Transient Voltage Suppressors) for surge protection: 12V rms
• Dimension:
  UST100/2GLIB UST100GLI: UST102GLIB-S
  63mmx36mmx21mm with two 165mm mini cable -BNC male and female connectors
   
• Material: PVC Black-UST100GLIB UST100GLI UST102GLIB UST102GLIB-S

"Green" Product

Brand-name Parts

Country of Origin

Distributorships Offered

Experienced Technical Staff

Form A

Guarantee/Warranty

Packaging

Product Features

Product Performance

Prompt Delivery

Quality Approvals

Service

Small Orders Accepted

Main Export Markets

• Eastern Europe
• North America
• Asia
• Western Europe
• Australasia
• Mid East/Africa, Central/South America