Product Main

Specifications

 HONGDU TESTING EQUIPMENT CO.,LTD.
HD-9B Power Plug Integrated Tester
 
 
Product explanation:
This tester is a integrated tester for plug.It is used to test the continuity,polarity,insulation,high-volt,leakage current, high current on E-wire of power plug.It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC,etc.It is a totally automatic testing machine makes your operation more convenient and simple.
 
 
Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt output value and persistence period can be adjusted separately.
* Test speed is quick,all test subjects will be achieved less than 2 seconds.
* The PLC control system comes from Mitsubishi,Made In Japan.
* The relay comes from Schneider,Made In French.
* If the specimen is incompetent,there is a alarm by buzzer and light.
* If the specimen is incompetent,this machine will stop at once and show you which subject is incompetent.Until you push the emergency button it will restart a new test.And a switch with key can be made to order to replace the high-volt starting button,it is very useful,because when a alarm happen,the operaters can not restart this machine,only after the managers have checked over and restart it by the key the machine will work again.
* When test over,the sample will be pushed out automatically,and a “T” or other characters will be marked on it(English characters only).
* A big current with 25A will be applied on E wire to check if it is eligible.
 
Technical parameter:
Polarity test
Test E,L,N wires in sequence
Insulation test high-volt
DC 500V +- 10%
Insulation resistance
2,7,20,50,100MΩ(can be made to order)
Inner high-volt
0~5KV +-5% (adjustable)
Outer high-volt
0~5KV +-5% (adjustable)
Leakage current
0.5,1,3,5,10mA(can be made to order)
Rated power
500VA
E-wire test current
25A
Cylinder power
 compressed air with 0.4 to 0.6Mpa
Dimensions
675mm W,480mm D,520mm H
Power source
AC 220V +-10%,50Hz
Weight
 35 kg, approximate
 
NOTICE:
1,Inner high-volt is applied between L,N,E wires,and the outer high-volt is applied between L,N,E wires and jacket.
2,Both 3-wire and 2-wire power plug can be tested by this machine.
 
Test Objects:
Power Plugs