Applications :
This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forge in bolster dies.
Features of pneumatic forging hammer:
+ Ready operation: economic and convenient + Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired + A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.
The main technical parameter of one piece pneumatic forging hammer :
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Applications :
This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging, welding, bending and twisting. It is also used for forging in bolster dies.
Features:
+ Ready operation: economic and convenient + Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired + A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand. |
The main technical parameter two pieces pneumatic forging hammer :
|
Model | C41-150 | C41-250 | C41-400 | C41-560 | C41-750 | C41-1000 | C41-2000 | |
Weight of falling parts (kg) ) | 150 | 250 | 400 | 560 | 750 | 1000 | 2000 | |
Maximum hit energy(kj) | 2.5 | 5.6 | 9.5 | 13.7 | 19 | 27 | 54 | |
Hit number(min-1)
|
180 | 140 | 120 | 115 | 105 | 95 | 80 | |
Heigh of working area (mm) | 370 | 450 | 530 | 600 | 670 | 800 | 1000 | |
Tup axis to frame front (mm) | 350 | 420 | 520 | 550 | 750 | 770 | 950 | |
Dimension of top die surface(L x W) (mm) | 200x85 | 220x100 | 250x120 | 300x140 | 330x160 | 365x180 | 400x300 | |
Dimension of bottom die surface(L x W) (mm) | 200x85 | 220x100 | 250x120 | 300x140 | 330x160 | 365x180 | 400x300 | |
Forges | Square(mmxmm) | 130x130 | 145x145 | 220x220 | 270x270 | 270x270 | 290x290 | 350x350 |
Round(mm) | Φ145 | Φ175 | Φ240 | Φ280 | Φ300 | Φ320 | Φ400 | |
Motor | Type | Y180M-4-B3 | Y180L-4-B3 | Y200L-4-B3 | Y280S-6-B3 | Y280M-6-B3 | Y315S-6-B3 | Y315L2-6-B3 |
Power(kw) | 18.5 | 22 | 30 | 45 | 55 | 75 | 132 | |
Weight | Hammer(kg) | 3260 | 5000 | 8000 | 9800 | 17000 | 20000 | 48000 |
Anvil block(kg) | 1500 | 2500 | 4800 | 6720 | 9000 | 13000 | 24000 | |
Outside Size |
2390x
1085x
2150
|
2639x
1155x
2540
|
2785x
1400x
2884
|
3464x
1500x
3157
|
3905x
1370x
3175
|
4125x
1500x
3770
|
4200x
2300x
4390
|