Description:
|
Turnstile ticket machine is mainly consist of parts: semi-automatic tripod turnstile,industrial standard mother machine, laser platform reader, Electronic information screen. Turnstile is the executive body of the entire check system, after swiping card, the laser platform reader will read information from bar code & transmit the information to system backstage to check. If the ticket is available, then there will be a green LED direction arrow on turnstile show the right way which you can pass easily with a push.During pedestrian pushing the arms of turnstile, stroke switch inside will judge whether the pedestrian go through or not, once it's go through, it's finished the right of access. Reading the valid common ticket(stripe card or ID/IC card), the owner can get one authorize access. When swiping the group ticket,he machine has capability to get the authorized entrance times, it will minus one access authority automatically every time one person passed. If it's no pass over its acquiescent time like 5 seconds or any time setted, the system will cancel this authority automatically & ticket machine will be locked. Still, you can get the remaining rights when swiping the ticket next time. Every time swiping card and every time people passed all recorded on computer which it's can effectively prevent fraud and improve the scenic area's economic benefit. using the omnidirectional bar code reader who greatly increase the rate of one reading of bar code ticket & prevent low read rate from blockage of personnel. After swiping card, there is LED indicator light prompt right way to access,at the same time, green arrow on immediately which inform pedestrian can pass. If the ticket is unavailable, then, the red cross-light will on and turnstile stop rolling. A electronic screen equipped above the machine, which can show the ticket type, current time and welcome etc. Ticket verification machine with counting function, the device automatically counting by the times of passed. Administrators can clear this figure too. When swiping group tickets, it will tell the number of non-passed on the screen. The button on the Ticket verification machinecan achieved the arms off automatically which for Peak period or emergency situation and clear the counter. Internal Structure: Steel frame structure Box Dimensions: 1400MM×280MM×980MM Brake lever length: 535MM Movement Power Supply: AC220V±10%/DC24±10% Movement failure rate: 300 million times Brake lever steering: one-way or two-way Off lever device: automatic off when power off/remote control off Brake lever steering: one-way or two-way Brake lever working drivers: 3Kg Brake lever Transmission: digitally Stroke switch: standard Lighting Tip: green movement, red no-go LED Power Supply: DC12V±5% Working environment: indoor, outdoor Ambient temperature: -30℃~60℃ Relative humidity: 5% to 90% Induction Reader Installation position: 2 Controller installed position: 2 Control signal: relay input Pass speed: 30 people/ min |