CPE 130A
Chlorinated Polyethylene Elastomer
Special For Magnetic Material
I. PROPERTIES:
This product is a kind of Chlorinated Polyethylene Elastomer with high cold-resistance and high filling level. Besides the characteristics of common Chlorinated Polyethylene, it also has the characteristic of high toughness at low temperature, and excellent acceptance of high filler levels. Moreover it has good processing fluidity and good gloss on the surface of product after filled.
II. SPECIFICATIONS:
Item
|
Index
|
Chlorine content (%)
|
30+/-1
|
Remains crystallinity (%) ≤
|
2
|
Volatile Matter content (%) ≤
|
0.3
|
Fineness (40 mesh)
|
100% through
|
Shore Hardness(Crude Rubber)(A) ≤
|
60
|
Thermal decomposition temperature (℃) ≥
|
165
|
Tearing Strength (Crude Rubber)(Mpa) ≥
|
9
|
Stretching Rate ≥
|
850
|
Apparent density (g/ml) ≥
|
0.55
|
Whiteness (R457) ≥
|
86
|
III. USES:
This product can be used for magnetic rubber products and as modifier or solubilizing agent for non-polar rubber, such as EPDM etc.
CPE 130A+ferrite+additives:
Manufacture magnetic rubber sealing strips for refrigerator as well as various calendering markers.
CPE 130A+EPDM+flame retarder + other additives:
Manufacture insulation layer of various wire and cable for middle and low voltage, cured EPDM roof.
CPE 130A+ferrite+additives:
Manufacture magnetic rubber sealing strips for refrigerator as well as various calendering markers.
CPE 130A+EPDM+flame retarder + other additives:
Manufacture insulation layer of various wire and cable for middle and low voltage, cured EPDM roof.