Comes in Aluminum alloy material with acrylic cover.

-  Available for 100-150V 60Hz and 190-260V 50Hz. 277V version is also available.

-  Built with dedicated LED driver with PWM constant current supply to ensure longer operating life and to minimize brightness deterioration due to over-driven, unlike many other designs where only normal rectifier and simple RC circuit is employed.

 -   Any individual LED failure will not cause other LEDs in working condition to black out.  This is an added advantage over other designs.                

-  Direct plug-in replacement for conventional T8 Fluorescent tube i.e. with electrical or magnetic ballast & starter. Note that it does not need such ballast & starter to operate, and normally its performance should not be affected, if left intact. However, for these models with HB LEDs and higher power factor value, it is recommended to bypass the magnetic ballast if there is negative impact on PF value or blinking.

-  Not recommended for fixtures with electronic ballast / starter due to much higher voltage.  The internal wiring of such fixture must be reconnected to have the electronic ballast / starter removed.

-  Brightness can be controlled by external dimmer.

-  Lead-free, RoHS and CE certified.