Full automatic CNC punching cut to length line
The basic configuration
CNC feeder: Japan YASKAWA servo system
CNC system: Japan Mitsubishi system, Intelligent human-machine interface control, Chinese and English menu choices.
O type punching: punching mould ≤ 30mm, standard is 12mm, 14mm, 16mm.
Precise cutting: maximum shear width (selection)
Automatic centring institutions: 50~300mm, cutting width arbitrary adjustable.
Electric feeding machine: Toshiba frequency conversion control
Inverter control, infrared inspection automatic feeding
Feeding width: 300mm, diameter scope: 450-550mm
|
Model
|
Mould size
|
Sheet width
|
Sheet thickness
|
|
KYDO-150
|
￠10～20
|
50---150mm
|
0.1～0.5mm
|
|
KYDO-250
|
￠10～￠20
|
50---250mm
|
0.1～0.5mm
|
|
KYDO-350
|
￠10～￠20
|
50---350mm
|
0.1～0.5mm
|
Specifications
1. Sheet length no limit
2. Sheet width (selection)
3. Single sheet punching number 0～6
4. Thickness 0.5 mm
5. Max feeder speed 24 M/min
6. Length deviation ± 0.2mm
7. Angle deviation ± 0.025°
8. Burr height ≤ 0.02 mm, circle punching hole ≤ 0.03 mm
9. Carbide tool life 1 Millions of times/each grind
10 Compressed air consumption ～2 CBM/min
11, Feeder load 1.0T
12, feeder coil ID 450-520mm
Coil material requirements
1. Width tolerance ≤ 0.1 mm/M
2. Burr height ≤ 0.02 mm/M
3. S degree ≤ 0.1 mm/M
4. Edge wavy degrees ≤ 0.5 mm/M
5. Bending ≤ 1 mm/M
CANWIN AUTOMATIC EQUIPMENT LTD
CANWIN R& D CENTER