BOPP thermal lamination film
 good plasticity and smoothness, low density, good transparency, strong chemical resist

Use for

publications cover

·               Eg: Magazines, Books, Paper bags, Maps, and publicity materials

Package

·               Eg: Wine, Food, Medicine, daily consumer goods

Advertisement

·               Eg: Advertisement paper, Board, Drawing, Document, and Photos

 

SPECIFICATION & PARAMETER

MATERIAL

·               Surface layer: BOPP

·               glue layer: EVA adhesive

SPECIFICATION

·               Thickness: GLOSSY: 25μm(12+13) 27μm(15+12) 30μm(18+12)

·               MATTE: 27μm(15+12) 30μm(18+12)

·               Width: 310~1880mm

·               Length: 100~3000M

·               Paper core: 25.4mm (1 inch),58mm(2.25inches),76mm(3 inches)

·               BONDING: less than 2

Process Parameter:

·               Equipment for thermal film: dry and wet film laminator

·               lamination temperature: 95~105℃

·               Roller pressure: 10-20Mpa

·               Speed: 8-20 m/min

Directions for using BOPP thermal laminating film:

·               Normal process temperature is 90℃-105℃, roller pressure and temperature vary with different types of paper, ink and machines.

·               When using the film for the first time or do other treatment, try a small volume before mass laminating.

·               Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.

·               Make sure put the material in a low-temperature, dry place.